Stihl 026 Stock / Ported Comparison Pics

[Mastermind]

That sucks......

AS hosted those pics Mike, had I known the damn pics were gone I wouldn'ta bumped this thread.

 

[tlandrum]

I was going to bump some of my old threads a few weeks ago and found no threads or no pics in the ones I did find.

 

[glock37]

you don't keep a copy

 

[Mastermind]

I have copies of all my pics Mike, But I really can't remember which ones I used.....

I might sit down tonight an work on fixing this thread.....a lot of guys have used it.

 

[tlandrum]

ive still got them but thers no way to go back and put them in an old thread

 

[nmurph]

Bump for this one too. Good to see Google searches and links working again.

Is this 026 the one I picked up from you?

 

[glock37]

ive still got them but thers no way to go back and put them in an old thread

cant u just repost them at this point

 

[glock37]

randy if u cant find them theres a brand new oem cyl in box I sent you and can do a before and after

 

[Mastermind]

There's no way to edit these old threads.....

 

[redfin]

Interested to see the pics of what you did to the piston for clearnce on the first page.

 

[gregsl]

Interested to see the pics of what you did to the piston for clearnce on the first page.

Agreed, I have a 260 fully disassembled and these pics would be really helpful.

 

[jughead500]

Agreed, I have a 260 fully disassembled and these pics would be really helpful.

Yeap same here

 

[Jericho2211]

The same for me.

 

[The Ripper]

Use "Photobucket " to host your photo's.

 

[Mastermind]

These pics are forever gone.

I've been using Photobucket now for quite awhile, but these were uploaded to the site.

 

[Trx250r180]

ok this means i can send you my 026 for a free port job so you can take new pics then

 

[thomas1]

These pics are forever gone.

I've been using Photobucket now for quite awhile, but these were uploaded to the site.

Pics?

 

[Mastermind]

ok this means i can send you my 026 for a free port job so you can take new pics then

I still owe you one......I love that new seat.

Pics?

Don't get me started.

 

[PainAndMurphy]

Too bad about the pics.. but don't give up guys.. I'm now researching to figure out what's the best upgrade for my new found 024 Super which has the 026 stroke.. and I haven't checked the carb model, and if I wanna big-bore this puppy, it's either change to 260 shrouds, or shave a bit off the 2 top cooling fins.. did a plain upgrade of 024S with 260 top-end before, and it's running fine still.. any opinions? Or shall I carry on to search more relevant threads?

B.T.W. , this 024S is very nice, and seems like it has low hours comparing to it's age.. I just wonder what upgrade is best to make it a significantly more powerful work saw with the original carb, or with a 026/260 carb.... hmm...