stihl ms361 compared to 034av

[SawTroll]

Here's some of the details: No torque number for the 341/361 yet. I'd guess it's pretty much the same.

BTW : The 361 cylinder is quite different from the 026/036/044 etc...

KWF/DLG found max 3.4kW and max 3.7Nm for the 361 on the dyno, but I don't remember at which rpms.

They also found that the 036/360 never put out the advertised 3.4kW, but rather 3.3.....

 

[Stihl 041S]

Caution: Be really careful with the "Two Saw Plan." It can lead to the "Three Saw Plan," "Four Saw Plan," and so on.

And Ty thinks the 3 saw plan means 044/441/046. Yup that size is done. Now 065/066/660.

 

[PA Plumber]

And Ty thinks the 3 saw plan means 044/441/046. Yup that size is done. Now 065/066/660.

Well, not quite. I would have to get the 460 for that to work!

I do have a couple of smaller saws. One is in the 30cc range and the other is considered a 50cc.

 

[bigbadbob]

KWF/DLG found max 3.4kW and max 3.7Nm for the 361 on the dyno, but I don't remember at which rpms.

They also found that the 036/360 never put out the advertised 3.4kW, but rather 3.3.....

Will the 361 jug fit on a 036??? Could be interesting.

 

[blsnelling]

Will the 361 jug fit on a 036??? Could be interesting.

Totally different design in these saws.