The made in north america Old Magnesium Swap Meet.

Treestuff
Advertise with us
shop deals on amazon
Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
67L36Driver said:
Looking for the plastic fuel inlet strainer cover that has the hose barb feature.

Some P.O. sawed off the one on the Pioneer RA and just stuck a length of plastic straw in the hole.


I got stuff.
Click to expand...

Carl I probably have an extra I can send you. Off to futz around in the shop until it get's too hot. Will see if I can scare one up for you...
 
Terrill FA

I acquired a Terrill FA recently. I'm considering restoring it.

Does anyone have some pictures of a clean complete one? If so, please send them to [email protected] or post em' here.

Also, does anyone have any parts? I know I need at least a pulley cover and an engine top cover.

Thanks in advance,

Bryan
 
bplust said:
I acquired a Terrill FA recently. I'm considering restoring it.

Does anyone have some pictures of a clean complete one? If so, please send them to [email protected] or post em' here.

Also, does anyone have any parts? I know I need at least a pulley cover and an engine top cover.

Thanks in advance,

Bryan
Click to expand...

Mine has everything but top cylinder cover.
0.84


attachment.php


attachment.php


attachment.php


attachment.php
 
Rowan said:
Looking for a top cover/heat sheild, and a recoil for a Pioneer RA? Cash or trade... I have an running 031AV, and a couple of smaller pioneers (1073 1074) both have good compression, one is without spark.

Assuming I'll likely need seals etc.... haven't started pulling it apart yet. If I get rained out of my outdoor work this weekend I may start stripping it down to see what all I need.
Click to expand...

Found a starter.... but it has a broken recoil spring. Now looking for a spring for either an RA or one from a 600 series Pioneer.... Also still looking for a top cover and heat shield.
 
Rowan said:
Found a starter.... but it has a broken recoil spring. Now looking for a spring for either an RA or one from a 600 series Pioneer.... Also still looking for a top cover and heat shield.
Click to expand...

I found a spring for my RA on a peg board down at Jeffs Small Engine repair.

Plastic bag has "Stens 155-044, replaces Tecumseh 590433". Fits very well and works fine.

It is a Fairbanks-Morse starter.
 
67L36Driver said:
I found a spring for my RA on a peg board down at Jeffs Small Engine repair.

Plastic bag has "Stens 155-044, replaces Tecumseh 590433". Fits very well and works fine.

It is a Fairbanks-Morse starter.
Click to expand...

Thanks for the info... I found an online source "Rotory Corp Canada" and placed an order... brand new spring for just under $14... shipping on top though.

One step closer:rock::rock::rock:
 
Hey guys I just bought a Mall model 7 two man saw, but it needs a left hand muffler. Please let me know if anyone has a spare
 
Looking for a donor McCulloch 250 PHO to help complete a Super 250; equipped with an HL-63 would be a plus.

Have various forms of trading fodder.

Thanks!
 

Similar threads

Old Mac Guy
Some Times I Hate Lombards, But Love KeenKutter
Replies
6
Views
802
Old Mac Guy
Old Mac Guy

Latest posts

Back
Top