Ultimate Three Saw Plan

[Ironworker]

Realistically we all know that we only need one saw maybe two at most, but to have three, well that's just plain ol fun. And we won't even talk about the other ones because that's insanity.
Well here is mine.

First my Wicked Work Saw 2188 sporting a 24" bar. Great for the bigger stuff and noodling them. Probably one of the better ported large saws.
Next

441xp Super Magnum ported by Randy Evans. All around great firewood saw, the first one I grab and incredible with an 18" b&c. I will never let this one go.
And last but definitely not least.

346xp also ported by Randy. Pound for pound the best saw I've ever ran. I can not beleive the amount of torque that this thing has and the power that it holds in the cut.

 

[1Alpha1]

Nice family of saws.

You take good care of them!

 

[blsnelling]

Awesome trio there. My choice is 346, 372, & 390.

 

[Definitive Dave]

Awesome trio there. My choice is 346, 372, & 390.

Does the MS390 make your top three before or after it's ported?

 

[jughead500]

Just 3?

 

[psuiewalsh]

Numa, I'll take any of your extra saws since you don't need them.

 

[jughead500]

I could live with 3 of each brand and then 3 odd balls.

 

[Ironworker]

Numa, I'll take any of your extra saws since you don't need them.

I don't need two of the three pictured, never mind the ones in the basement.

 

[psuiewalsh]

I'm gonna' guess based on your comments, the middle one is the current keeper, until the next keeper comes along.

 

[psuiewalsh]

I could live with 3 of each brand and then 3 odd balls.

You ever try to count how many brands are on Acers site? !!

 

[MustangMike]

Good pics Numa, but I could just as well have gone with that nice ported 461 in there, tough pic between that and the 441, but then U have an 18" bar on it, which, IMO, is small for that size powerhead.

I have not run your big saw yet, next GTG!

 

[Haywire Haywood]

Good pics Numa, but I could just as well have gone with that nice ported 461 in there, tough pic between that and the 441, but then U have an 18" bar on it, which, IMO, is small for that size powerhead

Yup, 70cc is 24" bar range. 346xp-16, 372xp-24, 395xp-36 here

 

[User Name Here]

Not bad combos at all guys. My current 3 saw plan is 461 ported by Randy which wears a 28" B&C most of the time and a 32" when I need it, stock ms440 with 20", and a stock dolmar 421 with a 16". Works very well for me so far

 

[sawsawsaw]

I believe in multiple three saw plans as mentioned above.

However, may i present the ultimate three saw plan.....






: )

Sawsawsaw

 

[lindnova]

ms260, ms362, ms461 - only because that is what I have. I would give up the 362 for a 2 saw plan, but it is a nice saw. Hopefully I can keep it to 3 saws. I should stay away from this site....

 

[Hinerman]

Realistically we all know that we only need one saw maybe two at most, but to have three, well that's just plain ol fun. And we won't even talk about the other ones because that's insanity.
Well here is mine.
View attachment 400392
First my Wicked Work Saw 2188 sporting a 24" bar. Great for the bigger stuff and noodling them. Probably one of the better ported large saws.
Next
View attachment 400393
441xp Super Magnum ported by Randy Evans. All around great firewood saw, the first one I grab and incredible with an 18" b&c. I will never let this one go.
And last but definitely not least.
View attachment 400396
346xp also ported by Randy. Pound for pound the best saw I've ever ran. I can not beleive the amount of torque that this thing has and the power that it holds in the cut.

That is one fine line up out of the endless possibilities out there....

 

[Ironworker]

I believe in multiple three saw plans as mentioned above.

However, may i present the ultimate three saw plan.....



View attachment 400417


: )

Sawsawsaw

Those are nice.

 

[Mike Gott]

I like my ported 2150, ported 288 and ported 2186. And have ported 268 to use but that'd be a 4 saw plan......oops

 

[jughead500]

You ever try to count how many brands are on Acers site? !!

Not really dont think I can count that high.lol
Of course I meant current manufacturers mainly stihl and husky.my three odd balls would be
Redmax gz400
Echo cs600 p
Mac 700

 

[blk05crew]

How about a Poulan 5200 with 24" bar and chain, a 3400 with a 20" bar and chain and a S25CVA with a 16" bar and chain. (S25CVA is waiting on a carb kit.)