merc_man
Addicted to ArboristSite
Just rebuilt carb with gasket kit. When done i tried blowing through fuel inlet and could blow write through and air came out the impulse hole on carb. Which just fills cylinder with fuel. I pulled carb back apart to check everything. All looked good. Just wondering what im missing. Did i blow something out and not realize it.
Saw is poulan 2100. Reson for rebuild kit was carb was dirty. Saw ran before but not proper.
Sent from my SGH-I747M using Tapatalk
Saw is poulan 2100. Reson for rebuild kit was carb was dirty. Saw ran before but not proper.
Sent from my SGH-I747M using Tapatalk