nmurph
ArboristSite.com Sponsor
- Joined
- Nov 26, 2007
- Messages
- 16,162
- Reaction score
- 7,167
I repaired a 346 that had gasket sealant put on the carb flange partially blocking the impulse signal.
I also stripped a 346 to install a piston and do a MM. I found the bearings were shot and the cylinder is scored...he's getting an OE.
I also worked up four NE's. One is will be traded for a collector saw and the other one has already been paid for. I ran out of time tonight to run them. They should be fine as they all have new seals, carb kits, fuel lines and filter, and new pistons.
If you can read this, thank a 346
I also stripped a 346 to install a piston and do a MM. I found the bearings were shot and the cylinder is scored...he's getting an OE.
I also worked up four NE's. One is will be traded for a collector saw and the other one has already been paid for. I ran out of time tonight to run them. They should be fine as they all have new seals, carb kits, fuel lines and filter, and new pistons.
If you can read this, thank a 346
Last edited: