What in the world is this???!!! MS661 related.

[singinwoodwackr]

The Adventures of Pop & Squish
http://popandsquish.blogspot.com/

 

[singinwoodwackr]

now I'm hungry...
http://www.ouichefnetwork.com/oui_chef/2012/07/pop-squish-roasted-potatoes.html

 

[windthrown]

The Adventures of Pop & Squish
http://popandsquish.blogspot.com/

TL DR...

 

[windthrown]

now I'm hungry...
http://www.ouichefnetwork.com/oui_chef/2012/07/pop-squish-roasted-potatoes.html

These are really good. You can splash some vinegar on them in the oven and they are even better.

 

[blsnelling]

I popped these right out, so that they'll never get squished!

 

[singinwoodwackr]

These are really good. You can splash some vinegar on them in the oven and they are even better.

gonna try this tomorrow

 

[Moparmyway]

I've been running motul 800 off road and have been impressed with the oil residue at 40:1 but I think I'm switching to something else because of the carbon build up I've been seeing. I've torn down a new 660 multiple times after dyno testing and was not impressed when I seen carbon build up after wot hard dyno runs.

Any pics ?
I ran the 800 in something and had a carbon pebble lodge in the spark plug electrode gap. Caused some rough running ............ didn't see too much buildup on the crown, but have been running 32:1 with VP. I have almost 3/4 of a quart left, but if your pics show ugly, I might have to relegate the rest of the stuff to tractor lube (4 cycle) @ 100:1

 

[mdavlee]

Any pics ?
I ran the 800 in something and had a carbon pebble lodge in the spark plug electrode gap. Caused some rough running ............ didn't see too much buildup on the crown, but have been running 32:1 with VP. I have almost 3/4 of a quart left, but if your pics show ugly, I might have to relegate the rest of the stuff to tractor lube (4 cycle) @ 100:1

How much run time did the 066 have on it with the oil? I'll get a picture of the piston crown shortly for you.

 

[Moparmyway]

How much run time did the 066 have on it with the oil? I'll get a picture of the piston crown shortly for you.

Fuel has been nothing but VP94
She was run with a few different oils, but last tank or two was just R50
What did you run it with ?

 

[mdavlee]

She was run with a few different oils, but last tank or two was just R50

Ok the piston crown is pretty clean.

 

[blsnelling]

How much run time on that piston?

 

[Moparmyway]

I have 5-6 tanks ....last 2 tanks of R50........... I said it before and I will say it again.
R50 actually cleans up the crowns.
It had more carbon on it last time I looked at it with the bore-scope.
Could also be the VP with the R50
Curious what mdavlee ran it with ?

I bet the rest just about wipes off

 

[SteveSS]

You shuddup,
This is now an oil thread..

 

[Deleted member 83629]

I have 5-6 tanks ....last 2 tanks of R50........... I said it before and I will say it again.
R50 actually cleans up the crowns.
It had more carbon on it last time I looked at it with the bore-scope.
Could also be the VP with the R50
Curious what mdavlee ran it with ?

I bet the rest just about wipes off

supertech outboard i guess.

 

[Moparmyway]

supertech outboard i guess.

The PDF states that it is designed for high RPM 2 stroke race engines
I love it !!

 

[Deleted member 83629]

at $13.00 per gallon it just makes you wonder what they put in that stuff.

 

[Moparmyway]

at $13.00 per gallon it just makes you wonder what they put in that stuff.

They make it with DOES ............. it does everything I want it to !

 

[windthrown]

Yah just cannot have too many oil threads on AS!

 

[windthrown]

The Adventures of Pop & Squish
http://popandsquish.blogspot.com/

The real Pop n' Squish

 

[Roll Tide]

Every thread, no matter where they start, seem to always end up here.