What's On Your Bench? 2/15/13
- Thread starter Mastermind
- Start date
Help Support Arborist Forum:
machinisttx
Addicted to ArboristSite
jonsered raket
ArboristSite Guru
Some old race saws on the bench tonight. Any idea whats going on here? im stumped.View attachment 298361View attachment 298362
Sent from my SPH-M820-BST using Tapatalk 2
Sent from my SPH-M820-BST using Tapatalk 2
Naked Arborist
Hack from way back.
Water or nitrogen cooled drum maybe?
Mastermind
Work Saw Specialist
Stroker.....
Eccentric
Mister Wizard
That explains the clearance cuts.............but what about that funky homebrew brass/copper fitting threaded into the crankcase half?
Mastermind
Work Saw Specialist
Impulse.....
Naked Arborist
Hack from way back.
Good place to add juice 
That would pack the case.
That would pack the case.
Eccentric
Mister Wizard
####ty spot to put it......
Naked Arborist
Hack from way back.
Thought the same thing. Centered on the case is the place to put it. Pulsed juice on a reed motor. now your in the sweet spot.
ChainLightning
Vintage Saw Stalker
View attachment 301848
That big old hog just got off my bench. Cleaned the carb up good and had to do a little muffler work. Muffler wiggled off and I had to go get a new bolt for it. She is a 1 pull starter now. Other two are about to go on the bench. Husky 240 needs new recoil guts and the SL-9 needs some serious points cleaning.
That big old hog just got off my bench. Cleaned the carb up good and had to do a little muffler work. Muffler wiggled off and I had to go get a new bolt for it. She is a 1 pull starter now. Other two are about to go on the bench. Husky 240 needs new recoil guts and the SL-9 needs some serious points cleaning.
El Moobs
Are we there yet?
What's on your bench today???
Jon1212
Riff Raff Fart Knocker from other Forum's.
The disinfecting wipes are for when I have to work on a Stihl.
El Moobs
Are we there yet?
No saws.
Billet aluminum, titanium, and stainless AR-15 pistol in 300 BLK.
The barrel started like this.
And went on a diet.
Then there's the 1945 Case SC I picked up and have been tinkering with.
Billet aluminum, titanium, and stainless AR-15 pistol in 300 BLK.
The barrel started like this.
And went on a diet.
Then there's the 1945 Case SC I picked up and have been tinkering with.
El Moobs
Are we there yet?
looks like el moobs is doing an 044 and ms 461
MS461, and an MS661. You got one of them right Mike.
Brad, that machine work on that barrel is top notch.
Love the tractor too.
