what's on your bench?

[sachsmo]

http://www.arboristsite.com/attachment.php?attachmentid=155890&stc=1&d=1288398645

 

[Guido Salvage]

This (though not pictured on the bench)

And this (currently boxed up and sitting on my '62 Studebaker Hawk)

 

[sachsmo]

 

[pioneerguy600]

Still need to get the tank vent sorted out on this one,

Need to install a new fuel line and filter in this one.

,

This one needs a carb kit,

 

[Brian VT]

I just got a Husq. 51 (now a 55) back to it's owner tonight.
Tomorrow I'll be into a friend's Homelite 360.
Hopefully I'll get the new-to-me Homelite 450 up after that.

 

[pioneerguy600]

This one needs a cleaning up and maybe a carb kit or just clean out the carb.

This one just needs a cleaning, seems to run fine,

This one needs a carb cleaning,lines and filter

 

[pioneerguy600]

This one needs a cleaning up and maybe a carb kit or just clean out the carb.

This one just needs a cleaning, seems to run fine,

This one needs a carb cleaning,lines and filter

 

[sachsmo]

"git er done"

 

[pioneerguy600]

They all came in while I was in the middle of a remodel job, just completed that today so I will have some time now to get them done.
Pioneerguy600

 

[redunshee]

This (though not pictured on the bench)

And this (currently boxed up and sitting on my '62 Studebaker Hawk)

Is that a 4000 Gary? Looks like the flywheel from a 4000.

 

[redunshee]

Still need to get the tank vent sorted out on this one,

Need to install a new fuel line and filter in this one.

,

This one needs a carb kit,

NIce looking saws!

 

[ccicora]

Just an older 2000 saw motor...

 

[Brian VT]

Mmmmm......wild, low-bush Maine blueberries.
SOOOO much better than those big honkin' ones at farms around here.

 

[redunshee]

Mmmmm......wild, low-bush Maine blueberries.
SOOOO much better than those big honkin' ones at farms around here.

Vermont. Be up there in the Lake Champlain area in two weeks for deer season. That's if I leave the porch. Used to hit the hardwoods hard but have lost interest in recent years,

 

[heimannm]

Homelite 410, fuel system & carburetor kit

SD 166 / McCulloch SP118, clean up, carb kit, misc. repairs

Mark

 

[sachsmo]

 

[Brian VT]

That reminds me. I gotta get some T-handle Torx and Allens.
The mess of L-shaped and jack-knife ones I have takes the fun right out of working.

 

[Guido Salvage]

Is that a 4000 Gary? Looks like the flywheel from a 4000.

Bob,

That is the 3400 that I bought new about 1983. It quit running back in February and lost compression and it turns out one of the rings broke. I have been too busy buying saws to get it back together (including 4 more 3400's and a 4000).

Gary

 

[Walt41]

On one bench is a zip saw in pieces that fatty the cat is having a good time rearranging parts, on another is three stihl trimmers in various states of confusion and on the last one is a nice .270win getting trigger work and a cleaning.

 

[mactodd]

Husky 51 rebuild, Husky 359 getting the Zama upgrade, and a Poulan 3600 that needs a piston. Then there is the 3-10E that needs a battery pack install.