where do i get 372xp muffler bolts

[farrell]

Did some of the older 372`s have long bolts that went all the way through the muffler ,from the front face all the way through to the cylinder? Many of the other Husqvarna saws had long bolts.

I don't think so Jerry cause the 365/371 and the jred 2065/2071/2171/2172 all the same as a 372

 

[pioneerguy600]

I don't think so Jerry cause the 365/371 and the jred 2065/2071/2171/2172 all the same as a 372

I only asked due to the OP saying he needs bolts about 3" long.

 

[farrell]

I only asked due to the OP saying he needs bolts about 3" long.

Then we aren't talking bout a 372

 

[pa.hunter]

I only asked due to the OP saying he needs bolts about 3" long.

yep ! my fault i had a brain fart ! i have been working on so many 350s i forgot they take short bolt s

 

[pa.hunter]

You need M6x25 socket head cap screws

That's 6mm in diameter and 25mm long (about 1" long)

Your local hardware store should carry them

You need M6x25 socket head cap screws

That's 6mm in diameter and 25mm long (about 1" long)

Your local hardware store should carry them

you are right ! i was thinking they was long for some dumb reason thanks

 

[Little Al]

So they are approximately 1" long.

Now Now PG you are short changing yourself by .4 of inch

 

[mdavlee]

Stihl dealer