Yep, I've seen different publications call for different settings. Some say start both1 turn out, others have said start both at 1 1/4 turn out. This is on my 028 AV Super, which I would think is comparable to yours. Don't forget though, these are starting points. All said and done, my settings seem to end up near 3/4 on the L, and between 1 and 1 1/4 on the H.
Oh, and another thing. They say that you should start your adjustments with the idle screw turnes out (not hitting the idle plate), and that setting the L screw Rich will idle the saw. Well, my saw WILL NOT idle by manipulating the L screw only. I have to have the idle screw set also in order to idle my saw. Not sure why, but that's how it rolls.
Oh, and another thing. They say that you should start your adjustments with the idle screw turnes out (not hitting the idle plate), and that setting the L screw Rich will idle the saw. Well, my saw WILL NOT idle by manipulating the L screw only. I have to have the idle screw set also in order to idle my saw. Not sure why, but that's how it rolls.
Last edited: