Work saw video's - Post em'

[chainsaw kid]

Ported 261. Not bad for a small saw. Doesn't look as fast as Eric's 346 though.

]

That 261 goes nice. Is that a 3/8 set-up?

Eric did a 2149 I bought for a friend of mine a couple of years ago (jonsered guy). I'll try and get a vid of that little beast in the next couple of weeks.

 

[mdavlee]

Here's the xpw I did.

<iframe width="420" height="315" src="http://www.youtube.com/embed/Ye8ywtH_udE" frameborder="0" allowfullscreen></iframe>

 

[MacLaren]

Here's the xpw I did.

<iframe width="420" height="315" src="http://www.youtube.com/embed/Ye8ywtH_udE" frameborder="0" allowfullscreen></iframe>

I wish ya had some vids of the 2171 ya did. Fastest 2171 Ive ever saw. You aced that one Mike.

 

[mdavlee]

Here's Steve running it with a nice chain on it.

<iframe width="560" height="315" src="http://www.youtube.com/embed/n6zdFQfO7yE" frameborder="0" allowfullscreen></iframe>

 

[rymancm]

That 261 goes nice. Is that a 3/8 set-up?

No. .325.

 

[MacLaren]

Here's Steve running it with a nice chain on it.

<iframe width="560" height="315" src="http://www.youtube.com/embed/n6zdFQfO7yE" frameborder="0" allowfullscreen></iframe>

i believe it got stronger since that was shot.....
Besides you, i also want to get Andyshine77 (Andre) to port one for me as well. He does great work too.
Right now, Im really diggin the port work tree monkey (Scott) does where he cuts the combustion chamber. That 660 turned out great.

 

[rymancm]

Brad did a out standing job on that 261 shes a real runner for a 3ci saw..
nope no racechains on any of those saws if you look around my youtube you may find a few ...
here is one. that belongs to the brother of the guy thats running Kevin's saws.
<iframe width="420" height="315" src="http://www.youtube.com/embed/tZ660LB8k_0" frameborder="0" allowfullscreen></iframe>

Man, that thing sounds sinister....I love it!

 

[Andyshine77]

Here is a 372 I built for Mike, he seems to be happy with it.

<iframe width="560" height="315" src="http://www.youtube.com/embed/4uSIdaEYJNE" frameborder="0" allowfullscreen></iframe>

 

[MacLaren]

Here is a 372 I built for Mike, he seems to be happy with it.

<iframe width="560" height="315" src="http://www.youtube.com/embed/4uSIdaEYJNE" frameborder="0" allowfullscreen></iframe>

I give that a 10 out of 10 Andre. That baby aint nothin but the truth.........

 

[parrisw]

My 372, running too lean in this vid though, was just breaking in and started going lean.

[video=youtube;r3RUi9xNgxI]http://www.youtube.com/watch?v=r3RUi9xNgxI[/video]

 

[ECsaws]

Here's Steve running it with a nice chain on it.

<iframe width="560" height="315" src="http://www.youtube.com/embed/n6zdFQfO7yE" frameborder="0" allowfullscreen></iframe>

Mike that saw runs well you did a great job on that one... as for the chain LOl I know nothing about it... looks like it fit the saw pretty darn good :biggrin:

 

[ECsaws]

Here is a 372 I built for Mike, he seems to be happy with it.

<iframe width="560" height="315" src="http://www.youtube.com/embed/4uSIdaEYJNE" frameborder="0" allowfullscreen></iframe>

Andy all I can say is wow !!!! she runs extremely good for sure damnnnnn....
If you guys make the trip up to the GTG bring that beast with ya Id love to run it...

 

[mdavlee]

Yeah Eric I believe that was a pretty good combo for Steve.

Andy that saw is running real good too. :msp_thumbup:

 

[ECsaws]

Man, that thing sounds sinister....I love it!

Its NO work saw by any means.
here it is again Now that it has a real operator it may even do better cuz this bozo did it no justice....
<iframe width="420" height="315" src="http://www.youtube.com/embed/RKGoROFSIrc" frameborder="0" allowfullscreen></iframe>

 

[Stihlman441]

Stock 441 V Ported 441C V stock 460 all same bar and chain.

Why ant more builders porting 441Cs ?.

[video=youtube;epG-kuAGRyI]http://www.youtube.com/watch?v=epG-kuAGRyI[/video]

 

[chainsaw kid]

Stock 441 V Ported 441C V stock 460 all same bar and chain.

Why ant more builders porting 441Cs ?.

[]

That was a good comparison of the three. That ported 441cv is pull'in, are you going to port the others?

 

[chainsaw kid]

This is the same ms460 B/B in post #1 running a 8rim w/20" bar and round ground in some 10x10pine.

stihl 046 big bore ported - YouTube

 

[Andyshine77]

Its NO work saw by any means.
here it is again Now that it has a real operator it may even do better cuz this bozo did it no justice....
<iframe width="420" height="315" src="http://www.youtube.com/embed/RKGoROFSIrc" frameborder="0" allowfullscreen></iframe>

Very impressive, I know I have a long way to go.

 

[slowp]

I am burning this old hemlock now.

The Barbie Saw cutting...

[video=youtube_share;2zZfya9eabQ]http://youtu.be/2zZfya9eabQ[/video]

 

[komatsuvarna]

Nuttin fancy

But I thought I might post a few firewood cutters
372 in Shale Bark Hickory
[video=youtube;eXmRsnMJCGo]http://www.youtube.com/watch?feature=player_detailpage&list=UUYdwMEPoDxMyKvcORK7zRVA&v=eXmRsnMJCGo[/video]

[video=youtube;zIIH4_r_ziQ]http://www.youtube.com/watch?feature=player_detailpage&list=UUYdwMEPoDxMyKvcORK7zRVA&v=zIIH4_r_ziQ[/video]

MS460 I no longer have
[video=youtube;3V1xPL-EhdY]http://www.youtube.com/watch?feature=player_detailpage&list=UUYdwMEPoDxMyKvcORK7zRVA&v=3V1xPL-EhdY[/video]