Ranger Dave
ArboristSite Member
this is a 1998 350(44m) that i made up from a couple junked(scored cly) ones.i took the best lookin pistons and cyls and cleaned um up.the cyl still has some scoring but runs good and the compression is 175.so lookin through the carb box i found a HDA 199A and cleaned it and installed it.then i removed the cyl base gasket,run even better. then came the muffler mod,even better
357/359 carb on left,350 on right
muffler mod
drilled a hole on each side
filled the orignal hole with JB weld
357/359 carb on left,350 on right
muffler mod
drilled a hole on each side
filled the orignal hole with JB weld
Last edited: