Frank Rizzo
Custom Saw Modification 241c-441c,660 specialist
My wish is your commandThe owner is a member of this site. I'm sure I can ask him to do a video of 10 or 20 or 50 consecutive cuts just for you if that's what you'd really like to see
My wish is your commandThe owner is a member of this site. I'm sure I can ask him to do a video of 10 or 20 or 50 consecutive cuts just for you if that's what you'd really like to see
Is the 2149 the 351? 2147 is the oe and 2153 is ne346.That 2149 is actually more impressive in person running 3/8 chain in hard oak, I dare say it is the most impressive 50cc saw I have ran to date, want to run my 5105 against it one day, that will be fun!
All correct.Is the 2149 the 351? 2147 is the oe and 2153 is ne346.
346, 5105 and 550 are all great saws, but the king of the 50cc class is 346xp, nothing comes close in 3 cube
I've shaken Kevin's hand. Those phalanges are built for 50mm and up...Huskihl is that your build? I have an OE 346 that could use some work.
Yes. Armbru84 picked it up on eBay and and it sent to meHuskihl is that your build? I have an OE 346 that could use some work.
What is up with the 2149 cylinder design? Same basic design as the 346? Mahle or Husqvarna cylinder like the 353?Yes. Armbrus84 picked it up on eBay and and it sent to me
It's 42mm open port, completely different than a 346 jug.What is up with the 2149 cylinder design? Same basic design as the 346? Mahle or Husqvarna cylinder like the 353?
WOW! That thing is impressive for a 42mm open port.It's 42mm open port, completely different than a 346 jug.
Most likely it has a 44.3 346xp piston and cylinder on the 2149 mag case. It's a bolt on swap.WOW! That thing is impressive for a 42mm open port.
that is correctMost likely it has a 44.3 346xp piston and cylinder on the 2149 mag case. It's a bolt on swap.
Cole? Kevin?
That was what I thought, but no one has said otherwise so I figured it was a true 2149. That is why I wanted to clarify the model numbers.Most likely it has a 44.3 346xp piston and cylinder on the 2149 mag case. It's a bolt on swap.
Cole? Kevin?
It gets confusing. I put the same thing together last winter. I just called it a 2149/53That was what I thought, but no one has said otherwise so I figured it was a true 2149. That is why I wanted to clarify the model numbers.
Your memory is as short as you are. Carry on!That 2149 is actually more impressive in person running 3/8 chain in hard oak, I dare say it is the most impressive 50cc saw I have ran to date, want to run my 5105 against it one day, that will be fun!
Sorry. I wasn't trying to hide anything. I figured it was obvious that it wasn't the open port cylinder.That was what I thought, but no one has said otherwise so I figured it was a true 2149. That is why I wanted to clarify the model numbers.