Want to Sell 351/346

[ECsaws]

351 with a ported NE 346 cly.
Used a good used 346 cly and a new meteor piston.
One bolt in ext block was striped fixed it with a timesert ( good fix see pic). Everything else is well all OEM. Squish band cut, port timing adjusted, port and polish
I bought this saw from cuinrearveiw it’s a nice clean little saw.
Buyer can also have the original P/C
Asking $500 shipped in the lower 48. Or possible trade on a unmolested 372/2171
Here is a video running round LGX

 

[angelo c]

Eric. Not familiar with 351 ?
350 yes....good little saws.
GLWS

 

[ECsaws]

Eric. Not familiar with 351 ?
350 yes....good little saws.
GLWS

351 & 346 are basicly the same saw different P/C , mag cases

 

[chipper1]

351 & 346 are basicly the same saw different P/C , mag cases

Sort of a 353 oe, but there was also a newer version of the 351 with a primer bulb (made while the 353 was in production) and an older one without.

 

[chipper1]

351 with a ported NE 346 cly.
Used a good used 346 cly and a new meteor piston.
One bolt in ext block was striped fixed it with a timesert ( good fix see pic). Everything else is well all OEM. Squish band cut, port timing adjusted, port and polish
I bought this saw from cuinrearveiw it’s a nice clean little saw.
Buyer can also have the original P/C
Asking $500 shipped in the lower 48. Or possible trade on a unmolested 372/2171
Here is a video running round LGX

Looks great Eric.

 

[ECsaws]

Looks great Eric.

Thanks Brett , make someone a hellof a firewood saw

 

[Mike Gott]

First class saw builder here! Someone will surly be happy to have this saw!

 

[cuinrearview]

This saw was pretty cherry. I shouldn't have sold it. From what I've read and picked up a buyer will be basically getting a ported 346NE work saw here from a top notch guy.

 

[cuinrearview]

I would be remiss if I didn't point out, since Eric called me out in the original post, that the 'sert in the exhaust on the 346 cylinder offered here was not on the saw when I sold it to him. I would have no fear running it as he's offering it. Buy with confidence!

 

[chipper1]

I would be remiss if I didn't point out, since Eric called me out in the original post, that the 'sert in the exhaust on the 346 cylinder offered here was not on the saw when I sold it to him. I would have no fear running it as he's offering it. Buy with confidence!

Neither was the cylinder right lol.

 

[ECsaws]

I would be remiss if I didn't point out, since Eric called me out in the original post, that the 'sert in the exhaust on the 346 cylinder offered here was not on the saw when I sold it to him. I would have no fear running it as he's offering it. Buy with confidence!

Nope the saw had the 351 cly on it when I got it from you it can be included with saw.
I use timeserts in a lot of the race stuff they hold a lot better than taped holes in aluminum or magnesium

 

[sunfish]

Damn Nice saw! I'm fixin to 346 my brothers 351.

 

[chipper1]

Damn Nice saw! I'm fixin to 346 my brothers 351.

Buy this one and sell his, save you some time .

 

[sunfish]

Good idea Brett!

 

[ECsaws]

If your serious sunfish depending on what you have I may even consider a partial trade I’m always looking for 3ci saws

 

[sunfish]

If your serious sunfish depending on what you have I may even consider a partial trade I’m always looking for 3ci saws

I'll have to talk to my brother, as it's his saw. Will consider & thank you!
I'd sure like to have one of your saws in the mix. Have five 346s' right now, only three of em ported.

 

[chipper1]

Did you sell this yet Eric.

 

[Deleted member 150358]

That little booger looks like it would hold its own. Can't be giving much away to a stock 359. Except a little weight!

 

[chipper1]

That little booger looks like it would hold its own. Can't be giving much away to a stock 359. Except a little weight!

A 359 is very choked up stock . Yes it's a good bit lighter, both of them are favorites of mine, whether stock or ported.

 

[ECsaws]

Did you sell this yet Eric.

No sir , if it doesn’t sell in next couple weeks i going to send it to AA