020avp need chain and bar please help

[Duktape]

I have a old 020 avp currently has a 16" bar with a 1/4" .043 chain. I am looking for a new 12"or 14" bar and chain combo. They could not find any thing in 1/4" I tried to just get a 3/8 picco sprocket from my stihl dealer and they could not get it, called Bailey and they could not help me.. there has to be something out there. I want to use it as a limbing saw I was thinking the 1/4 .043 chain would really let it zip up rpms. I at least need a spare chain for what I have

 

[mkinslow]

Archer 14" Chainsaw Chain 1/4"-043-72DL Replaces Stihl# 3670 005 0072 71PM3 72 https://www.amazon.com/dp/B07MPWYZD6/ref=cm_sw_r_cp_apa_i_rrB4DbQKHY8NG

This is probably not the correct drive link count,but what you're looking for is out there

Sent from my SM-G892A using Tapatalk

 

[HarleyT]

https://www.amazon.com/STIHL-3005-008-3405-12-Bar-043/dp/B00IF6ZNJ4

 

[Duktape]

The current chain us a stihl, markings are 1/4" and number 3 on the bottom. The bar is an aftermarket, all i can make out it DURO, something, stampings on the bar J30 3005/4013. Chain has 80 drivers sprocket has no numbers on it .

 

[mkinslow]

Oregon 540390 14-Inch Double Guard Bar and 91VG .043-Inch Chain Gauge, Saw Chain Combo Pack https://www.amazon.com/dp/B005229NAY/ref=cm_sw_r_cp_apa_i_92C4DbZA5VVXH

Sent from my SM-G892A using Tapatalk

 

[Duktape]

Oregon 540390 14-Inch Double Guard Bar and 91VG .043-Inch Chain Gauge, Saw Chain Combo Pack https://www.amazon.com/dp/B005229NAY/ref=cm_sw_r_cp_apa_i_92C4DbZA5VVXH

Sent from my SM-G892A using Tapatalk

Do you think that is the correct chain as well?

 

[mkinslow]

Do you think that is the correct chain as well?

For that bar yes,can't really say for the other bar you already have

Sent from my SM-G892A using Tapatalk

 

[Duktape]

So as long as I stick with 1/4", if I switch chain and bar I can switch to .050 and everything will be fine correct?

 

[mkinslow]

So as long as I stick with 1/4", if I switch chain and bar I can switch to .050 and everything will be fine correct?

Yes

Sent from my SM-G892A using Tapatalk

 

[TLG]

Forrestor has the 1/4" set up in .043" gauge. You would spend more on a 3/8" drive sprocket than a new 1/4" B&C set up.

Sent from my XT1635-01 using Tapatalk

 

[Brushwacker]

The current chain us a stihl, markings are 1/4" and number 3 on the bottom. The bar is an aftermarket, all i can make out it DURO, something, stampings on the bar J30 3005/4013. Chain has 80 drivers sprocket has no numbers on it .

3 on the bottom means it is .050 gauge.
Duro i think would be a stihl logo
Post what you want in trading post, some one here should have it.

 

[Duktape]

Forrestor has the 1/4" set up in .043" gauge. You would spend more on a 3/8" drive sprocket than a new 1/4" B&C set up.

Sent from my XT1635-01 using Tapatalk

The only thing I can find in the forster website for 1/4 bar is carving nose bars

 

[scottr]

Hey Duktape , check your private messages .

 

[HarleyT]

To remind folks, one must find and replace the oil pump gear if changing pitch.
That makes things even more difficult.

 

[mkinslow]

To remind folks, one must find and replace the oil pump gear if changing pitch.
That makes things even more difficult.

I've never heard that ,is it just for this saw or others too?

Sent from my SM-G892A using Tapatalk

 

[HarleyT]

Only with saws with a similar style oil pump system.

 

[HarleyT]

The sprocket sits in the indentation of the gear,

so it needs to match.

 

[mkinslow]

Gotcha, thanks

Sent from my SM-G892A using Tapatalk

 

[EJay]

Oregon 540390 14-Inch Double Guard Bar and 91VG .043-Inch Chain Gauge, Saw Chain Combo Pack https://www.amazon.com/dp/B005229NAY/ref=cm_sw_r_cp_apa_i_92C4DbZA5VVXH

Sent from my SM-G892A using Tapatalk

That’s a 3/8 bar/chain isn’t it?

 

[mkinslow]

That’s a 3/8 bar/chain isn’t it?

Yeah it is,sorry,I'm basically trying to get OP to see that if you look around you can find what you are looking for

Sent from my SM-G892A using Tapatalk