Search results

Dropped to $60

Drop to 70.

Price drop to $80

Lowered the price

https://www.arboristsite.com/community/threads/ms-441-m-tronic-conversion.323726/#post-7020167 This was thread of the conversion.

I took these off a MS441 that I converted to a mtronic one. I couldn't locate a mtronic flywheel with heater magnets. Was working when removed. I'm no longer building saws and this is the last parts that I have. What you see is what you get. Standard carb crankcase flywheel half. Standard...

Yes, It is.

No clue. It was a trash can find at the dealer. Said gears were bad. Case screws were loose. Edit: after googling, it does appear to be a ht70 or 75.

I need an ipl for an older stihl pole saw head. Number on the metal is : 4138-641-0300. Its the older one with the one piece oil tank.

Price drop to 375

I used a 4 1/2" angle grinder with a cutting disc for cutting cast iron. I had to remove a really stuck flywheel from a briggs opposed twin and bought the disc for cutting it off. It cut so well, I tried it on the cylinder and the rest of the junk parts. A belt sander to even out my cuts and...

As requested. I hit a stopping point.

I certainly will be posting a nice pic. I'm cleaning up all the melted plastic from cutting it in half. It will be all shiny clean when done.

Im making a 562xp display from a bunch of junk parts. I've cut it in half and am still looking for a few more parts. I'm needing the heat shield, muffler, black air baffle, intake bellows, carb and filter manifold/filter. Basically all the stuff in this ipl pic. I'm really looking for free...

I'd like to buy a kombi powerhead side driveshaft. Specifically 2,3 and 6 in the pictured ipl.

Bump

I've got an extra 562xpw that I want to sell. This saw has a new oem crankcase assembly and a new p&c. The cylinder has a few bad decomposition threads. It appears to be a casting void. I plugged the hole with an oem plug and it passes pressure and vacuum tests. I replaced the worm, the oil...

I would buy a used pro saw 100x before I would buy a new 4 series rancher. If you are any bit mechanically inclined, the used looks nicer. There are quite a few saws on here for sale by reputable people that I'd consider before touching a plastic case saw...

I got a parts saw from ebay. Like 150 or so. I sold the other parts to bring the cost down. You almost need a parts saw or the cost will be prohibitive. I did it more do so if it could be done.