Search results

So, did you figure out how it works? My HT-133 just stopped cutting and after tearing everything apart, I determined that everything is as perfect as out of the factory. It's just nothing to stop the flexible shaft that goes into the clutch from coming out when you pull the extention tubing...

Update on this little project. Thank you Mrhemihead for the tip. It worked well with the auto feed plus. Spent all day (raining anyway) fabricating the bracket and making harness. All worth it.

pictures of ur diamond wheel grinder setup?

it looks like will fit. ordered. Thx

That's very usefully information. I did not know that kohler makes a tach sensor for its engines. I'll look into it to see if it'll fit.

got he timing light leads with transformer today. hooked it up the auto feed plus and no reading at all. signal must be too weak for it. while there, did some more tests. it turned out that the 8V AC I reported in my OP, is only true if one of the test leads is connected to either of the two...

Thx for ur suggestion. not sure if it'll address the issue since I was already getting 8V stable AC reading from my own setup. However, it's cheap enough to try it. Just ordered one.

If anyone has managed to get it work with the new kohler engine, plz share, Thx. planning to replace the non-working Bandit factory autofeed with Auto Feed Plus before the season starts. There is no easy way to mound a mag pickup anywhere on the engine. At least I did not figure out how...

me and a super ground guy who has been with me for over 10 years, I can pocket 1500 to 2000 an 8-hour day. 2400-3000 is not rare and feels great! 100% climbing, 12" or 6" bandit chipper and 60 hp stumper. don't remember when it was last time I used my bucket truck.

I put an CH25 on my old BC620 and it's great before I sold it to my friend. Now I have a Bandit 250 and 65. The 25 hp Kohler on the 65 died recently and I'm in the process now to put a 37 HP Kohler on it and it'll be kick ass machine (only $2800 delivered). Not sure if the 6' Vermeer can handle...

not sure if sc30tx uses the same pump as sc60tx. here is what I found out when I replace my hydraulic pump: https://www.************/forum/threads/if-your-vermeer-sc60tx-has-a-leaky-hydraulic-pump-read-this.39918/

Got it for 16k n will never let go!

Vermeer sc60TX, third party remote control, just GREAT!

my dream truck is the trucks I have now. F350 7.3 dully pickup for general towing. F550 14' dump chip truck goes with my beloved bandit 250. I love a truck that drives like a pickup or car but still have the power and capacity. I HATE older mid-sized trucks like my bucket truck, big...

You sound like the old me in some way. I used to only wear bandana on my head to wick up the sweat, A lot of it. That was why I never ever wear safety glasses while climbing. I tried all kinds of eye protective wear and even the one made of fine wire mesh instead of plastic. Everything changed...

Just another thought recently going through my mind. If I were you, I’d go get a mini track crane before getting a lift. That’s to say if you still can or enjoy climbing like I do. I just couldn’t imagine a better setup than having a remote controlled 37 foot mini track crane right next to the...

It looks like that u have similar equipment setup as I do, maybe a little more. The difference is I work part time. I went through the same mental process and decided that it’s not worth it for me. This is totally depended on my continued ability to climb after I just turned 55. I don’t even use...

As to price, he's asking for 2000 for everything I have. if u get the carlton system for 1450, u have to do some adaptation and add the voltage modulation module ur self.