It’s more fun to cut in the woods with a Ported hot saw. The 288 was awesome to buck with.
Now you have me wanting to port my 570 that has low compression. I can put a new ring in it or I have a orginal oem husky cylinder/piston top end kit from husky. I’d rather salvage the used cylinder if it’s still good hate to waste new parts.
HUSKYBILL HOW ARE U DOING BUD .
Yes the port straight does pop exaust back at you when calm outside also I have heard it can get hot on extreme dry wood as well ... I was testing port arrangements on stock mufflers on dyno and this set up went rather nice in numbers on dyno ... a .3 gain over all other arrangements there were 8 muffler mods that I tried after smoke testing a muffler on flow bench what a pain in the butt . I cut one muffler side completely off glued it to a clear pieace of acrylic and bolted to the cyl put it on my flow tech and went to adding smoke I learned alot that day with many different cylinders ..the Fogg hugged that lowwer left corner with no swirling affect obviously the exaust wanted that corner once I opened it up I had to turn the fog machine up from #3 to number 10 just to be able to see the smoke in flow pattern it also showed me the highest exaust rebound affect as piston was moved up and down in cyl.. it took me over a week to get this set up working on a snowmobile cyl. for a fella that builds and owns a nor east us sled shop. he held the world record radar pass on a two stroke tripple snomobile from what he told me after I finished his port job on this bench.. I set up to be able to install a piston and use a electric motor on a foot peddle I stold off my tig machine. So I could run a certain rpm which are very slow not even close to idling when Engine is running but it open up a whole world of info in port design... yep i have built just about every saw out there from stock to snot rocket with and without the laughing gas. With that being said I hope they keep on downing the 570,75,76 saws so I can keep on buying them at a reasonable price. So fellas you are so right those 570,75,76 saw are a waiste of money just buy a 372 xp like mine.. and his and his, his, hers, his ,there's...its got better power it's a whopping real world scale bar, oil, chain,gas, weight lighter buy .8 lbs depending on what scale in what bathroom at the playboy mansion u use just a plain out boat anchor ... keep up the reviews guys along with that thing we all have that is exactly the same between thousandths of men women in world called opinions. LMAO..I will keep on building these 570,75,76 along with any other husqvarna,stihl,poulan,mcculloch,echo,red,
Blue,green,purple,pink,saw a customer ask me to OH YEAH P.S THOSE DANG CHINA SAWS ARE ALSO THE BIGGEST JUNK EVER ... YOU SHOULD NEVER BUY ONE OR BUILD ONE..I ORDERED UP A COUPLE KITSAWS AND WOULD U BELIVE IT THERE WAS TWO CASE SCREWS MISSING AND THE OILER WAS COVERED IN OIL I PUT IT TOGETHER ANY WAYS WITH THOSE CRAP CHINA BEARINGS MY BUDDY SAID WERE JUNK I PUT FUEL IN IT AFTER BUILDING AND IT.................!!! SILENT FOR A WHILE .. WELL AFTER IT STARTED AND I TUNED IT BUY HEARING AID AND A FLASHLIGHT RAN OK FOR ABOUT 50 GALLONS OF FUEL THEN PUKED ITS GUTTS OUT CAN U BELIEVE THAT THING IS A POS ... SORRY HISKYBILL IM RAMBLING LOL COFFEE WAS GOOD THIS MORNING I AGREE BUD THOSE 570 SERIES ARE GREAT SAWS WITH MORE POWER STOCK THEN ANY HUSY SAW IN CCSIZE SAME AND LOWER.. ITS COMON LAW NO REPLACEMENT FOR DISPLACEMENT. HAVE A GOOD DAY BUD IM CUTTING FIRE WOOD FOR THE FIRE PIT FOR THIS SUMMER TODAY
Sent from my SM-N960U using Tapatalk