Jimothy
ArboristSite Member
That pretty much says it all. Can anybody recommend an 18" bar and chain either semi-chisel or full-chisel?
Regards,
Regards,
PP5020av 18" bar and chain remmendations needed
- Thread starter Jimothy
- Start date
Help Support Arborist Forum:
Try a search. I know there was a pretty extensive thread in the Chainsaw forum on this saw.
Chris-PA
Where the Wild Things Are
You can use the Oregon Selector Guide:
http://www.oregonproducts.com/pro/lookups/selguide.aspx?BusId=OCS&SellReg=USA&LangId=ENG
http://www.oregonproducts.com/pro/lookups/selguide.aspx?BusId=OCS&SellReg=USA&LangId=ENG
I always recomend the pro bars but no point in exceeding the saw value with an 18in TSB.
Carlton A2LM cuts good and is modestly priced through Baileys.
The bar is just a KO95 which is small husky and can be bought anywhere. A decent Oregon pro-lite bar and a full comp chain or two will suit any needs you have.
Semi-chisel = slower cutting but lasts longer between sharpenings
full chisel = clean wood for faster cutting.
The forester bars are OK and about the best deal for chain and bar combo
http://www.ebay.com/itm/FORESTER-HU...744?pt=LH_DefaultDomain_0&hash=item4ac2da1f98
Carlton A2LM cuts good and is modestly priced through Baileys.
The bar is just a KO95 which is small husky and can be bought anywhere. A decent Oregon pro-lite bar and a full comp chain or two will suit any needs you have.
Semi-chisel = slower cutting but lasts longer between sharpenings
full chisel = clean wood for faster cutting.
The forester bars are OK and about the best deal for chain and bar combo
http://www.ebay.com/itm/FORESTER-HU...744?pt=LH_DefaultDomain_0&hash=item4ac2da1f98
