ArboristSite.com Sponsors


rebuilding a husky 55 with issue

Outdoorguy1979

Outdoorguy1979

ArboristSite Operative
Joined
Mar 15, 2019
Messages
132
Age
40
Location
25541
so im rebuilding a husky 55 and ran into a issue, I rebuilt the saw and have a air leak when doing a compression test
I put a new warhawk cylinder piston kit on it
new cross crank bearings and seals
and a cylinder gasket
everything went together great no issues, so I put the saw back together and did a compression test and with in 20 seconds I was watching the needle slowly go down.
I was wondering what areas go bad as I resued the impulse pipe and the bigger rubber hose and carb gasket
 
ammoaddict

ammoaddict

Addicted to ArboristSite
Joined
Sep 23, 2017
Messages
1,488
Age
57
Location
Granite Falls, NC
You are saying compression test but are you meaning to say vacuum and pressure test? If you are indeed using a compression gauge, then it's probably just leaking down.

Sent from my moto g(7) power using Tapatalk
 
Top