Outdoorguy1979
ArboristSite Operative
so im rebuilding a husky 55 and ran into a issue, I rebuilt the saw and have a air leak when doing a compression test
I put a new warhawk cylinder piston kit on it
new cross crank bearings and seals
and a cylinder gasket
everything went together great no issues, so I put the saw back together and did a compression test and with in 20 seconds I was watching the needle slowly go down.
I was wondering what areas go bad as I resued the impulse pipe and the bigger rubber hose and carb gasket
I put a new warhawk cylinder piston kit on it
new cross crank bearings and seals
and a cylinder gasket
everything went together great no issues, so I put the saw back together and did a compression test and with in 20 seconds I was watching the needle slowly go down.
I was wondering what areas go bad as I resued the impulse pipe and the bigger rubber hose and carb gasket