• Please be aware that we have recently gotten a wave of users that, when researched, are found to be from Nigeria. They are trying to sell products and asking to be paid through Zelle or Venmo leaving users with no recourse if they don't ship the product. If you suspect this activity please contact admin and we will research their information to verify their location.

ArboristSite.com Sponsors
Peak Industries


stihl 064 rebuild

jltrent

jltrent

ArboristSite Guru
Joined
Sep 13, 2011
Messages
635
Location
Virginia
Looks to be above the port and about even with the top of the exhaust port the liner missing. That cylinder has been honed hard from the looks . You could put a meteor piston in and hope a ring does not get caught on the liner and hope compression is acceptable all you have to lose is a $33 piston and 30 minutes time.. If acid had been used to remove the transfer and light sanding the cylinder might could have been nice. That honing no doubt removed the liner hole and made the rest thinner.
 
Top