Crappy Stihl Cylinder - Looks like ChiCom Garbage!!!

[Erick]

Pink slips? Do those Kawas have a good resale value? Don't know if my Stihl dealer will take one in on trade for another 100RX.

My trimmer was built for real men.... sorry nothing pink about it.

But we can run for a crying towel if you want... you're gonna need it.

Me -->

<-- you

 

[parrisw]

Stihl as a company can't give out cylinders because it "looks bad", much less just bring in a cylinder off the saw and say, "look, it preforms bad". Brad has a good dealer but if Stihl finds out about this, his dealer will eat that cylinder. The saw should have went in as a whole, the complaint would have been "low power" and the right steps would have been taken to resolve this issue.

Me and you are in the auto repair bussiness, you just said you would not warranty that, me either. Now if it were one of my good customers, I would bend alittle to try and help.

2K, I wasn't talking about that. I was responding to your statement of hurting Stihl. Re-read what I said.

 

[2000ssm6]

I'd say the preform and the form were bad.

For certain but we don't know how it "preformed".

 

[2000ssm6]

2K, I wasn't talking about that. I was responding to your statement of hurting Stihl. Re-read what I said.

If this thread made Stihl lose 1 sale, they were hurt, not enough to make a squat but it hurt.

 

[parrisw]

If this thread made Stihl lose 1 sale, they were hurt, not enough to make a squat but it hurt.

Yes, I know. But I was saying it wasn't Brad's fault!!!!!!!!! Stihl did it to themselves by putting a lesser quality cylinder in their saws. You can't blame Brad for simply just pointing it out.

 

[2000ssm6]

My trimmer was built for real men.... sorry nothing pink about it.

But we can run for a crying towel if you want... you're gonna need it.

Me -->

<-- you

No reason to be scared.

You before><a href='http://www.thescubasite.com/Scuba-Diving-Techniques/learn-underwater-videography' title='learn underwater videography'><img src='http://www.mysmiley.net/imgs/smile/ashamed/ashamed0006.gif' alt='learn underwater videography' border='0'></a> <a href='http://www.thescubasite.com/' title='scuba diving community'><img src='http://www.mysmiley.net/imgs/smile/party/party0043.gif' alt='scuba diving community' border='0'></a> <--Me after the showdown.

 

[2000ssm6]

Yes, I know. But I was saying it wasn't Brad's fault!!!!!!!!! Stihl did it to themselves by putting a lesser quality cylinder in their saws. You can't blame Brad for simply just pointing it out.

This thread would not be almost 100 pages if it was "simply pointed out".

 

[Erick]

I'm out fellas, the wife just said it was time for bed.... she wins.

 

[edisto]

This thread would not be almost 100 pages if it was "simply pointed out".

That ain't the reason for the length of the thread.

 

[parrisw]

This thread would not be almost 100 pages if it was "simply pointed out".

Ummm ha ha. It's because people can't let it go.

 

[2000ssm6]

That ain't the reason for the length of the thread.

Maybe not 100%, but I'd say atleast 90% of the reason.

 

[THALL10326]

Interesting...why, just yesterday you said I didn't have a set.

Well...today...you can lick my balls.


.

Haha, like you really got a set. Had to get someone else to find FOR you what you couldn't produce yourself. If you ever want kids calls me, I can produce without help. Now lick that, woose,LOLOLOLOL

 

[spacemule]

Maybe not 100%, but I'd say atleast 90% of the reason.

2000, the reason is simple. No one likes to see shoddy workmanship defended on a brand with a premium reputation. Simple as that. It's disgusting. It makes consumers feel they've had one put over on them.

Had the defenders responded like Spike did in regards to problems that he's seen, that is, balanced and not making excuses and not running around after red herrings, this thread would have died a long time ago. If you'll notice, I quit stating the obvious way back in this thread, because it's obviously not helping anything. I do admit to losing a little bit of respect for several members here.

And that's all I'm going to say. May this thread die.

 

[parrisw]

2000, the reason is simple. No one likes to see shoddy workmanship defended on a brand with a premium reputation. Simple as that. It's disgusting. It makes consumers feel they've had one put over on them.

Had the defenders responded like Spike did in regards to problems that he's seen, that is, balanced and not making excuses and not running around after red herrings, this thread would have died a long time ago. If you'll notice, I quit stating the obvious way back in this thread, because it's obviously not helping anything. I do admit to losing a little bit of respect for several members here.

And that's all I'm going to say. May this thread die.

Yes please, let it go, let it go, let it go. Kumbaya, my friend.

 

[THALL10326]

I think all of them could get along with ya. If they come a barkin', they will be howlin' out the door. I made my first post thinking the whole saw would be taken in and checked out by a tech, Now I see no reason for his dealer to replace that cylinder under warrenty because that dealer doesn't know the complete story. Woodie may catch a hammer upside the ole noggin', but I'm sure it's happened before. Either one is going to get a ear full of cuss and Elvis tunes, LOL.

I'm not sure how much longer I'll be with Nissan but if I leave, I'll have to drive down and help ya wrench for a day or two. I Stihl need to check out Hoss's collection and maybe meet Eddie.

Yup, I'd tell Woodie you say fat Elvis your azz is out that door,LOL

If you ever want to meet Eddie, that can be arranged. May as well walk through the factory while we're hooking up with him. Sometime in the summer when things slow down we'll set it up. Should we take Woodie, maybe the factory can install some sense in that head, naaaa, not that much automation in this world,LOL

 

[THALL10326]

(in my best Starkist Tuna voice)

"Sorry Tommie"

Haha, sorry forwhat, I'm glad someone helped him, 1.6ci was getting old,haha

 

[THALL10326]

2000, the reason is simple. No one likes to see shoddy workmanship defended on a brand with a premium reputation. Simple as that. It's disgusting. It makes consumers feel they've had one put over on them.

Had the defenders responded like Spike did in regards to problems that he's seen, that is, balanced and not making excuses and not running around after red herrings, this thread would have died a long time ago. If you'll notice, I quit stating the obvious way back in this thread, because it's obviously not helping anything. I do admit to losing a little bit of respect for several members here.

And that's all I'm going to say. May this thread die.

Not yet it isn't. What did I say last nite that you was pointing out I was somehow losing my good humor, I never found it Space??

 

[blsnelling]

2000, the reason is simple. No one likes to see shoddy workmanship defended on a brand with a premium reputation. Simple as that. It's disgusting. It makes consumers feel they've had one put over on them.

Had the defenders responded like spike did in regards to problems that he's seen, that is, balanced and not making excuses and not running around after red herrings, this thread would have died a long time ago. If you'll notice, i quit stating the obvious way back in this thread, because it's obviously not helping anything. I do admit to losing a little bit of respect for several members here.

And that's all i'm going to say. May this thread die.

+100000000000000000000000000000000!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

 

[2000ssm6]

2000, the reason is simple. No one likes to see shoddy workmanship defended on a brand with a premium reputation. Simple as that. It's disgusting. It makes consumers feel they've had one put over on them.

Had the defenders responded like Spike did in regards to problems that he's seen, that is, balanced and not making excuses and not running around after red herrings, this thread would have died a long time ago. If you'll notice, I quit stating the obvious way back in this thread, because it's obviously not helping anything. I do admit to losing a little bit of respect for several members here.

And that's all I'm going to say. May this thread die.

You may be correct and everyone mentioned their thoughts and ideas. Just remember when there is a bashin', you will get a reaction. Now I want to know who you lost alittle respect for?

 

[2000ssm6]

Yup, I'd tell Woodie you say fat Elvis your azz is out that door,LOL

If you ever want to meet Eddie, that can be arranged. May as well walk through the factory while we're hooking up with him. Sometime in the summer when things slow down we'll set it up. Should we take Woodie, maybe the factory can install some sense in that head, naaaa, not that much automation in this world,LOL

Hey, now we are talkin'. A tour of the VA beach plant wood be kool! Leave woodie at home with booker and parris, no need to break their date up. Stihl would need help from NASA to get their IQ levels past 1 digit.