Brian_42
ArboristSite Operative
I just rebuilt a Husky 357XP with a Walbro carb today (ebay purchase), I installed a used cylinder, new OE Husqvarna piston/ring, and bearings. I just got everthing together, I replaced the plastic manifold clamp with a metal one, plastic one was broken, most likely the source of the scorred piston/cylinder. The saw will start great, and runs fastastic for about 3-5 seconds, then die like the someone hit the kill switch.
Any input or advice from you pros out there is greatly appreciated.
Any input or advice from you pros out there is greatly appreciated.