McCulloch Chain Saws

Shop deals on ebay
Rugged made
Treestuff
Advertise with us
Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
blsnelling said:
More yellow arrived today. Why no numbers stamped on the block?

QUOTE]

Replacement blocks didn't always have numbers or paint, which is most likely what you have. It is an SP=125 block, but can't tell from the pictures if it is a "c" block or not.

I don't care what the vultures here say (me included :msp_ohmy:), save that fully adjustable SDC carb no matter what!
Click to expand...
 
What can yall tell me about a Double Eagle 80? Im headed after one in the morning. Supposed to be a good runner, with a 24" hard nose. Ill have pics, providing I dont get beat out of it.
 
Tinkering on a 1-42 in the cold shop one of the 1-41/1-42 stamped with no foot support bracket(They came that way) models .I'll tell ya those great HL carbs fire right up in super cold conditions with just a couple pulls as it was 8 degrees. I would like to thank my PM800 for the many cords we bucked out of the forest this Fall and the chain that wouldn't go dull. Pile of saw chips as big as a VW took 3 days to burn. 6 Trees out of snow zone just to keep the saws running over winter. Plenty of saws good moonshine and seats next to the wood stove..don't be shy so come on by...
 
800

RandyMac said:
002-1-1.jpg
Click to expand...

Randy is that the 800 we talked about this spring? I have two of the 5 I have running that I took to the Ia. and Ar. gtg's.One running a 37" roller nose full comp with a 7 pin and pulls strong. Have a 28" roller nose with full comp and 7 pin I can lean on this one. I going to try a 8 pin on a third with a 28 to compare it with. I am trying to find a mac branded roller nose 24". The people who have run both of these saws have been impressed with them.
 
OREGONLOGGER said:
Tinkering on a 1-42 in the cold shop one of the 1-41/1-42 stamped with no foot support bracket(They came that way) models .I'll tell ya those great HL carbs fire right up in super cold conditions with just a couple pulls as it was 8 degrees. I would like to thank my PM800 for the many cords we bucked out of the forest this Fall and the chain that wouldn't go dull. Pile of saw chips as big as a VW took 3 days to burn. 6 Trees out of snow zone just to keep the saws running over winter. Plenty of saws good moonshine and seats next to the wood stove..don't be shy so come on by...
Click to expand...

Shine and a seat by the stove sounds great,but at 8 degrees you would need a winch to get me away from the stove
 
My mistake

Yup that pic looks like my saw. Or did before i took it apart lol. So i gues it has bulfrog carb. I wil try to figure out how to post pics tonight. Im computer impaired lol. Thanks again.
 

Similar threads

R
McCulloch ProMac 700 Bar
Replies
8
Views
640
Syncop8r
Syncop8r
C
Want to Buy McCulloch Super 250
Replies
6
Views
810
Bill G
B
Chainsaw Collectors
McCulloch 610 chain brake guard install, help?
2
Replies
20
Views
1K
singinwoodwackr
singinwoodwackr
B
New from Bavaria
Replies
5
Views
536
Syncop8r
Syncop8r
J
A few very nice old saws
Replies
0
Views
499
jackdaripper
J

Latest posts

Back
Top