zogger
Tree Freak
Same here, except it is my dad and my mom trying to cope. It's a horrible disease.
Nik's Poulan Thread
- Thread starter FATGUY
- Start date
Help Support Arborist Forum:
Same here, except it is my dad and my mom trying to cope. It's a horrible disease.
redunshee
Addicted to ArboristSite
Don't know why I never thought of throwing the plate away! Wonder if it would make a diff. if you put the new exhaust opening on the other side of the muffler? Wonder if there is enough space for it? Have to check.
Bob
Hey Dennis, I don't know the fuel line size but the small tygon fuel line fits my zama and walbro carbs. You might want to take the muffler off and look at the piston,ring,and cylinder for scoring. Then open the muffler and inspect the spark arrester screen for carbon build-up. When you remove the limiters trim the ears off and put them back on and you'll be able to use a screwdriver for adjustment.
I think it's 3/32 but not positive.
Hey Joe, you're correct, it is 3/32" inside diameter and the outside is 3/16".
Yeah, I usually stock up on that size more than anything else..
Eccentric
Mister Wizard
More anti-Poulan nonsense on AS. This time specifically targeted at the XXV sereies.
http://www.arboristsite.com/chainsaw/195505-2.htm#post3531203
Blackoak responded well to the moron. I held back, as I would have just posted something nasty. I'll respond after I cool down a bit more. Maybe one of you gents can school the jackass. We had JUST made another Poulan convert (Read the rest of the thread to see the conversion process) when this idiot piped in......
http://www.arboristsite.com/chainsaw/195505-2.htm#post3531203
Blackoak responded well to the moron. I held back, as I would have just posted something nasty. I'll respond after I cool down a bit more. Maybe one of you gents can school the jackass. We had JUST made another Poulan convert (Read the rest of the thread to see the conversion process) when this idiot piped in......
nick 55
ArboristSite Guru
I did PM the convert and we discussed the saws to look for. I tried, hell, even Bsnelling chimed in with a video of one he ported.
Nick
Nick
Yeah, Poulan made millions of them because they were so unpopular. Actually, I've never owned one....I've owned between 5 and 10 at a time but never one. Right now it's around six.... That's just the 25 series.
nick 55
ArboristSite Guru
Zogger and I both just chimed in, although mine was a little more smart-assed.
Nick
Nick
StinkyBunny
ArboristSite Operative
I chimed in too. I get a tad bent when people start their crap about Poulans.
rms61moparman
Addicted to ArboristSite
Well don't get too bent.
He is partially right..........to some extent.
Part of the problem is Poulans screwed up numbering system.
The S25DA is very nearly the perfect top handle chainsaw!!!
The XX series is a lot closer to the opposite end of the spectrum.
Now don't get me wrong the worst of the Poulan saws are better than the majority of the competetion but they PALED in comparison to the S25DA.
Mike
He is partially right..........to some extent.
Part of the problem is Poulans screwed up numbering system.
The S25DA is very nearly the perfect top handle chainsaw!!!
The XX series is a lot closer to the opposite end of the spectrum.
Now don't get me wrong the worst of the Poulan saws are better than the majority of the competetion but they PALED in comparison to the S25DA.
Mike
racer1970
ArboristSite Member
I agree, I love my S25DA
I haven't tried it but I would bet the S25DA and other older reed valve Poulans would perform as good if not better than any modern saw today in its class and CC size and last longer as well.... what do you all think?
haha me too
havent gotten a XX yet Mike. Never see them come up around here.
nick 55
ArboristSite Guru
All this talk about them makes me want another one. A real cream puff, and the nice running one I have now(the beat up looking one) will get Snellerized.
My friend has an MS200T. I should run them side by side this spring and see how they do. That would really chap some asses if I posted that video.
Nick
My friend has an MS200T. I should run them side by side this spring and see how they do. That would really chap some asses if I posted that video.
Nick
nick 55
ArboristSite Guru
Joe, you should hope the prices go up so you can cash in on some of your collection.
Once you've worked on a Stihl 200T you'll be glad to own a Poulan 25DA!
View attachment 227868I picked up a real nice Super 25DA at an auction. There were several hundred people there and when this saw was up for bids it's like the bidders had their backs turned or something. I picked it up for around $10. I don't think there was another bidder, had a nice Windsor bar and chain which looked to be low mileage. Hey, I'll take them if nobody wants them! This one isn't gonna be for sale..
Last edited:
Eccentric
Mister Wizard
I like my little Craftsman1.9/Poulan XXD. Strong running, well built little saw. Has a Tillotson HU14 carb too. Not crazy about either of the oiler setups on that saw however.
I do too. Glad you guys jumped in. With the lack of sleep I've had over the last few days, I wouldn't have been able to type an even halfway civil response to that asshat. I also agree with what Joe said...........we should let ####birds trash talk the Poulans to keep the resale prices down...
Similar threads
