mopar969
ArboristSite Operative
Hey guys does anyone know the number of links and the bar I can use for an 18" setup on the poulan pro 5020? Oregon's bar selector tool only lists details for the 20" setup. Thanks!
Hey guys does anyone know the number of links and the bar I can use for an 18" setup on the poulan pro 5020? Oregon's bar selector tool only lists details for the 20" setup. Thanks!
holy crap. 4.2 or 5.2? either way, incredible saw. Ran one for 25+ years
Anybody know the PN for the Poulan 3300 crank seals?
https://www.partstree.com/parts/poulan/parts/530019146/
Nate, Lots of Poulan IPL's here.
http://www.barrettsmallengine.com/poulan/partslist.html
? No one, I'm alone on this?
-•------------------------------------------------------------
Just a home owner that likes the older better made machines
Craftsman 3.7 x2
Husqvarna 36
How would one go about replacing the roller bearings? Heat them?
I always like that pic......, in any thread.
My rim clutch drum came today. Getting ready to open the package.
My rim clutch drum came today. Getting ready to open the package.
Looks fantastic. The part that goes over the crank and bearing surface has old grease on it. Truly new old stock. I do have a question though. On my current drum there is a large spacer washer that goes on the crank between drum and clutch. Just looking at the Oregon, the clutch bell looks shallower. Do I leave the large spacer washer out? Just clutch drum then thread the clutch on?Drum roll Maestro
I need to switch my grey one over to rim. Where did u get yours?
-•------------------------------------------------------------
Just a home owner that likes the older better made machines
Craftsman 3.7 x2
Husqvarna 36
Looks fantastic. The part that goes over the crank and bearing surface has old grease on it. Truly new old stock. I do have a question though. On my current drum there is a large spacer washer that goes on the crank between drum and clutch. Just looking at the Oregon, the clutch bell looks shallower. Do I leave the large spacer washer out? Just clutch drum then thread the clutch on?
Ebay.
Put the washer in. You want to make sure the drum doesn't lock to the clutch. The clutch needs to be within the drum though. Not a bit of it outside the drum.
Enter your email address to join: