JohnMaddux541
ArboristSite Operative
Might be a long shot but recently got a 254xp with good compression but needs some extra stuff. I’m looking for a good coil, switch, muffler, and starter recoil. Interested in parts saws as well. Thank you
You can become a Supporting Member which comes with a decal or just click here to donate.
Do you have any pictures?I got a few 254 parts saws
Sent from my iPhone using Tapatalk
My saw has a good jug but I may be interested stillI have a brand new oem cylinder if your interested?
sounds awesome thank you!Let me get you pics tomorrow when I get home from work, it appears to be one of the good older ones where the combustion chamber is a lot smaller then some of the others I have laying around probably builds a lot more compression and would be a better runner!
You can use a coil from husqvarna 55 also a muffler and a switch. All are available in aftermarket parts too. The starter recoil is a different story its harder to find. The top cover, recoil and chain brake are this model down side if missing they are all hard to find.Might be a long shot but recently got a 254xp with good compression but needs some extra stuff. I’m looking for a good coil, switch, muffler, and starter recoil. Interested in parts saws as well. Thank you
Awesome thank you. I was just seeing what was out there but I will keep that in mind!You can use a coil from husqvarna 55 also a muffler and a switch. All are available in aftermarket parts too. The starter recoil is a different story its harder to find. The top cover, recoil and chain brake are this model down side if missing they are all hard to find.
I have air filters and c&p should you become desperate enough to cover shipping cost.Might be a long shot but recently got a 254xp with good compression but needs some extra stuff. I’m looking for a good coil, switch, muffler, and starter recoil. Interested in parts saws as well. Thank you
Awesome thank you! I think I’ll be ok on that stuff but I will let you knowI have air filters and c&p should you become desperate enough to cover shipping cost.
Re: coil/ignition. Look wider than 55 if you need to.
Husky 40 (early models with Electrolux ignition), 50,51, 55, 154, 257, 262, 268, 272.
Because you're in Oregon, where Partner had a good distributor, Partner 400, 500, 5000+ and later will also work.
My experience is limited to 1980s 154 and 254 saws. You guys may know more than me.I have a starter for a 154. It has the spring and a good plastic but missing the rope and rotor. Mike
Enter your email address to join: