SteveSr
Addicted to ArboristSite
When you have one of these grenade like this what is the best practice to clean the bottom end out. Piston aluminum might or might not be much of a problem depending on size but any errant pieces of the circlip would be.
What would be the advisability of pulling the crank seals to allow inspection and flushing of the crank bearings vs. splitting the case? And then there is the big end bearing that should be flushed. Any tips?
What would be the advisability of pulling the crank seals to allow inspection and flushing of the crank bearings vs. splitting the case? And then there is the big end bearing that should be flushed. Any tips?