You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Help Support Arborist Forum:
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
41
freebe: 1996 40cc 130psi Made by:
POULAN/WEED EATER
Shreveport, Louisiana 71129 U.S.A
DIVISION WCI OUTDOOR PRODUCTS, INC.
Took off the incorrect D095 small husky mount bar (18"/.325/.058) and changed to a correct D041mount bar to try and solve solve the oiling flood. That stopped a lot of leaking here, but, found the oil tank stopper had the wrong o-rings, now corrected, better, but oil flood continues.
Poorly ultrasonic plastic welded oil tank is the cause for the leak at the bottom seam.
Found that oregon lists sprockets for .325, 3/8lp AND 1/4.
A husky 36/41 is listed as a wood carving saw on the oregon site and is why it calls for a 1/4" chain.
1/4" pitch in 8 pin spur or 9 pin rim, crankshaft is .394" (10mm) all suitable also for modern plastic poulans i/e. 2150 etc...
PHO 10lb-2oz
POULAN/WEED EATER
Shreveport, Louisiana 71129 U.S.A
DIVISION WCI OUTDOOR PRODUCTS, INC.
Took off the incorrect D095 small husky mount bar (18"/.325/.058) and changed to a correct D041mount bar to try and solve solve the oiling flood. That stopped a lot of leaking here, but, found the oil tank stopper had the wrong o-rings, now corrected, better, but oil flood continues.
Poorly ultrasonic plastic welded oil tank is the cause for the leak at the bottom seam.
Found that oregon lists sprockets for .325, 3/8lp AND 1/4.
A husky 36/41 is listed as a wood carving saw on the oregon site and is why it calls for a 1/4" chain.
1/4" pitch in 8 pin spur or 9 pin rim, crankshaft is .394" (10mm) all suitable also for modern plastic poulans i/e. 2150 etc...
PHO 10lb-2oz