Ryobi muffler mod pix

shop deals on amazon
Rugged made
Shop deals on ebay
Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
roncoinc

roncoinc

Official Stihl Disser
Joined
Jun 11, 2009
Messages
16,088
Reaction score
1,495
Location
N.H.
I know this has been posted about before but it may have been missed and i didnt get to see pix so i thot i would and practise inserting images.
This has got to be the easiest muffler ever.
one screw and two nuts and it comes apart.
as has been said when drilling be carefull the bit dont grab and go out the back of the muffler !!
attachment.php

attachment.php
 
Last edited:
Looks good.

attachment.php


attachment.php


I can't tell that well, but if the edges are not smooth, ream the outer edge of the drilled hole so that's it's more smooth for optimum flow.
 
I can't tell that well, but if the edges are not smooth, ream the outer edge of the drilled hole so that's it's more smooth for optimum flow
Click to expand...

I forgot to add in about cleaning it up and smoothing and such,.also about making SURE no metal scrap,chips,filings,burs,etc..left inside the muffler..
thank you.
 
For sure, make sure it's clean inside of shavings. I clean mine with hot water (be careful!) and soap to get rid of the oil and whatever shavings are stuck to it. And then I pressure wash it like there's no tomorrow.
 

Similar threads

O
Poulan 3400 muffler mod
Replies
3
Views
558
RedneckChainsawRepair
RedneckChainsawRepair
M
Echo CS440 Muffler Mod
Replies
2
Views
395
MikeRC
M
RedneckChainsawRepair
Husqvarna 346 OE 45cc Echo 490 50cc
Replies
9
Views
619
bwalker
B
Brewmaster
Muffler Pipes, Saw Mods, detensioning and single ring
2 3
Replies
46
Views
2K
Lightning Performance
Lightning Performance
T
Modded Stihl MS180C / WT215 swap not running right?
Replies
17
Views
1K
NJ1911
NJ1911

Latest posts

Back
Top