Want to Sell 026/260, 044/440 cylinders and parts

[2000ssm6]

Prices are shipped unless noted, let me know a zip for quote. Payments are pp f&f NOT GS, check or m/o. All listed is available unless noted.

026/260
026 muffler, would be good for a stock appearing race saw, lots of flow, $25
026 oem Mahle 44mm p&c, piston is new but has some discoloring, needs rings, $125
026 Tree Sling'r ported oem Mahle 44mm p&c, piston is new but has some discoloring, needs rings. Squish band not cut, $175
260 oem piston kits, 44.7mm, $50 shipped each. These are new but may be discolored. 12/23, one left.

All these are used but clean inside unless noted

1. 044, no decomp, Stihl "B" cylinder. $145

2. 044/440, decomp, Stihl "B" cylinder. $145

3. 044, no decomp, slant fin, Not K&S, Mahle "A++++++" cylinder. $235. Not sure what saw this is from, could be a 10mm or 12mm.

4. Sold

5. 066/660, no decomp, Stihl "A" cylinder. Thin plating and a mark above exhaust port, would be a good practice cylinder for porting or if a company does plating. $30

Not pictured, a 046/460 with decomp, A cylinder. Thin plating, would be a good practice cylinder for porting or if a company does plating. $30

 

[snobdds]

Sent PM

 

[ColinNS]

Sent PM

 

[ColinNS]

Sorry?

 

[Cas101326]

Do you happen to have a good 044 10mm crankshaft? Also a recoil cover and clutch cover

 

[Owyhee H]

Pm'd

 

[2000ssm6]

Bumpers

 

[chilipeppermaniac]

Bumpers

As in all of the above from 2022 as shown in Pics and not denoted as sold, is still available ? 026, 044.

Is the Mahle 044 cylinder a 10 or 12MM slanted version. My saw is a 10MM. Also, I don't suppose that you have any 10MM Pistons?

What are the particulars on that assemblage of saw in parts?

 

[2000ssm6]

List is current. I'm not sure what version 044 it is from, with all the + marks, it has had several revisions. I don't have any 10mm pistons.

 

[chilipeppermaniac]

List is current. I'm not sure what version 044 it is from, with all the + marks, it has had several revisions. I don't have any 10mm pistons.

OK thank you.

My current saw is a KS and it has Angle fins and 115/12++ serial on saw is 124xxxxxxx

 

[Woodheat95]

Prices are shipped unless noted, let me know a zip for quote. Payments are pp f&f NOT GS, check or m/o. All listed is available unless noted.

026/260
026 muffler, would be good for a stock appearing race saw, lots of flow, $25
026 oem Mahle 44mm p&c, piston is new but has some discoloring, needs rings, $125
026 Tree Sling'r ported oem Mahle 44mm p&c, piston is new but has some discoloring, needs rings. Squish band not cut, $175
260 oem piston kits, 44.7mm, $50 shipped each. These are new but may be discolored.

All these are used but clean inside unless noted

1. 044, no decomp, Stihl "B" cylinder. $145

2. 044/440, decomp, Stihl "B" cylinder. $145

3. 044, no decomp, slant fin, Not K&S, Mahle "A++++++" cylinder. $235. Not sure what saw this is from, could be a 10mm or 12mm.

4. Sold

5. 066/660, no decomp, Stihl "A" cylinder. Thin plating and a mark above exhaust port, would be a good practice cylinder for porting or if a company does plating. $30

Not pictured, a 046/460 with decomp, A cylinder. Thin plating, would be a good practice cylinder for porting or if a company does plating. $30
View attachment 1037241
View attachment 1037242

Pm sent