tree_chomper
ArboristSite Operative
Need a piston
-
If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.
You can become a Supporting Member which comes with a decal or just click here to donate.
Want to Buy 026 piston
- Thread starter tree_chomper
- Start date
Help Support Arborist Forum:
drf255
BAD CAD
I have a bunch of used ones. What size?
They're so cheap new that buying a used one is a bit of a waste of time.
The 44.7 OEM is around $25 shipped on eBay. The 44 is tough to find OEM but is available in a meteor for under $40 to your door.
They're so cheap new that buying a used one is a bit of a waste of time.
The 44.7 OEM is around $25 shipped on eBay. The 44 is tough to find OEM but is available in a meteor for under $40 to your door.
tree_chomper
ArboristSite Operative
Yea was kinda hoping someone had one close to me so I wasn't waiting a week and a half. Cause ofcourse my dealer don't have one and would take over a week to order.
drf255
BAD CAD
Youre listed as living in the USA. I'm there too.
Check with definitive dave.
tree_chomper
ArboristSite Operative
It's an early 026 so that would be the 44mm correct? I've heard 44mm or 44.7mm quite a bit but then I did hear a mention of a 44.3mm. What gives?
tree_chomper
ArboristSite Operative
Thought it said indiana. Oops. That's where I'm at.
drf255
BAD CAD
You really should measure to be sure.
To the best of my knowledge, all 026 were 44mm. 260's were 44 or 44.7.
Never heard of a 44.3mm 026.
To the best of my knowledge, all 026 were 44mm. 260's were 44 or 44.7.
Never heard of a 44.3mm 026.
tree_chomper
ArboristSite Operative
Right on, appreciate the info.
Similar threads
