Trigger-Time
Addicted to ArboristSite
Log was White Oak 56" long, 21" dia after it was de-barked. I have 3 more to mill,
all out of the same tree. this one is the smallest dia and the shortest.
066 pics
Used 026 for the rest, cant was 7.5 inches wide.
Trying my hand at milling a bench seat that is
in the back of Logosol Manual.
Kind of proud how it turned out.
What I ended up with, made five cuts with 066, rest was cut
with 026.
026 done a very good job on the 7.5 inch wide boards (75 sec. per board), it
only used 1.5 tanks of fuel and saves some wear and tear on 066. I really like
the picco chain. May find a 017 to use for edging boards and slabs
3 inches and thinner. I had along enough break now, see if I can mill
one more log
Gary
all out of the same tree. this one is the smallest dia and the shortest.
066 pics
Used 026 for the rest, cant was 7.5 inches wide.
Trying my hand at milling a bench seat that is
in the back of Logosol Manual.
Kind of proud how it turned out.
What I ended up with, made five cuts with 066, rest was cut
with 026.
026 done a very good job on the 7.5 inch wide boards (75 sec. per board), it
only used 1.5 tanks of fuel and saves some wear and tear on 066. I really like
the picco chain. May find a 017 to use for edging boards and slabs
3 inches and thinner. I had along enough break now, see if I can mill
one more log
Gary