Want to Sell 1/2" pitch, 52DL, Poulan chain, .063g

[singinwoodwackr]

Picked this up recently, it had surface rust and wouldn't move much. Used but in good condition. Got most all of the rust off and soaked in penetrating oil. All links move freely.
Poulan brand, .063g, 52dl (not sure what length that equates to)

$50/OBO
Ships in a sm flat rate box, $10.70, I think.

 

[Bill G]

I believe you will find that is .063 gauge #10AC chain made by Oregon for Poulan.

 

[singinwoodwackr]

I believe you will find that is .063 gauge #10AC chain made by Oregon for Poulan.

Ah, could be. I have a cheap caliper will measure in several places.

 

[singinwoodwackr]

I believe you will find that is .063 gauge #10AC chain made by Oregon for Poulan.

You are correct... .063 it is, thanks

 

[Bill G]

You are correct... .063 it is, thanks

I suspected it was .063 the number 10 on the driver is the Oregon number for 1/2" , 0.063, and being a chipper design that would make it Oregon #10AC. That is more desirable than .058 also. The .058 would be marked with a 9 on the driver.

 

[singinwoodwackr]

I suspected it was .063 the number 10 on the driver is the Oregon number for 1/2" , 0.063, and being a chipper design that would make it Oregon #10AC. That is more desirable than .058 also. The .058 would be marked with a 9 on the driver.

I couldn’t read any markings until I used a de-rust bath. Once it was gone everything showed up

 

[Breckinridge Elkins]

1/2" chain is a rare bird and $50 is a deal. If it was longer I would snag it myself.

 

[rupedoggy]

chisel is gold chipper is silver

 

[Bill G]

chisel is gold chipper is silver

That is why I keep the chisel I have.