-
If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.
You can become a Supporting Member which comes with a decal or just click here to donate.
Sold 2 full boxes of Griffiths & Beerens Harvester Chain 404 .080
- Thread starter Sawsrusinc
- Start date
Help Support Arborist Forum:
chainsawman2011
Addicted to ArboristSite
Is it $450 per roll. Or $450 for both rolls
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Sawsrusinc
ArboristSite Operative
It was 450 for both but they sold today
chainsawman2011
Addicted to ArboristSite
Grande Dog
ArboristSite.com Sponsor
Howdy,
If anybody happens to be looking for more of this chain, I have it for $133.56 per 100'. It does qualify for free shipping while the sale is on.
http://leftcoastsupplies.com/product/100-gb-404-x-080-harvester-chain/
Regards
Gregg
If anybody happens to be looking for more of this chain, I have it for $133.56 per 100'. It does qualify for free shipping while the sale is on.
http://leftcoastsupplies.com/product/100-gb-404-x-080-harvester-chain/
Regards
Gregg
ChoppyChoppy
Tree Freak
Free shipping to 99645?
Grande Dog
ArboristSite.com Sponsor
Howdy,
Normally the deal is for the lower 48. If you don't mind the repackaging, I would do it for you also. I fold 2 opposing ears of the reel on both ends and it goes in a USPS "fits it ships" box. If you get all the same sized loops, I would spin up a reel for a $1.00 a loop.
Regards
Gregg
Normally the deal is for the lower 48. If you don't mind the repackaging, I would do it for you also. I fold 2 opposing ears of the reel on both ends and it goes in a USPS "fits it ships" box. If you get all the same sized loops, I would spin up a reel for a $1.00 a loop.
Regards
Gregg
ChoppyChoppy
Tree Freak
64 driver? Bar is 642hsfl114
ChoppyChoppy
Tree Freak
How many drivers on a roll?
Not sure driver count on the processor, but bar is Oregon 642hsfl114
Grande Dog
ArboristSite.com Sponsor
Howdy,
There's 1484 links per reel. The most common loop for that bar is 74 but can be different depending on the drive sprocket size, and the application it's mounted on. Considering that's what you're using, it would be $153.56 to you door for 20 loops of chain. $133.56 to your door for a reel. Since you mentioned the bar I have some deals on GB bars for your application. This one is an exact replacement, and I have 2 of them at $37.69ea. http://leftcoastsupplies.com/product/21-gb-harvester-bar-404-080-3/ I also have the same thing in a replaceable tip bar but, the mount is slightly different. See attached image The one on the left is the exact replacement. The one on the right is the same thing without the 2 auxiliary holes by the part number sticker. If your mounting application doesn't use the auxiliary holes, then this bar will also work http://leftcoastsupplies.com/product/21-gb-harvester-bar-404-080/ They are $47.32 each. I would do them for the free shipping also. 70lbs is the most weight per package. The loops are about 1.5lbs each, and the bars are 6lbs each.
Regards
Gregg
There's 1484 links per reel. The most common loop for that bar is 74 but can be different depending on the drive sprocket size, and the application it's mounted on. Considering that's what you're using, it would be $153.56 to you door for 20 loops of chain. $133.56 to your door for a reel. Since you mentioned the bar I have some deals on GB bars for your application. This one is an exact replacement, and I have 2 of them at $37.69ea. http://leftcoastsupplies.com/product/21-gb-harvester-bar-404-080-3/ I also have the same thing in a replaceable tip bar but, the mount is slightly different. See attached image The one on the left is the exact replacement. The one on the right is the same thing without the 2 auxiliary holes by the part number sticker. If your mounting application doesn't use the auxiliary holes, then this bar will also work http://leftcoastsupplies.com/product/21-gb-harvester-bar-404-080/ They are $47.32 each. I would do them for the free shipping also. 70lbs is the most weight per package. The loops are about 1.5lbs each, and the bars are 6lbs each.
Regards
Gregg
Attachments
ChoppyChoppy
Tree Freak
Do you have a similar price on longer bars? The bigger processor and deliver run the same bar, 27" I think. I'll get a part number later today.
My processor is 74 driver, and the tail is in the photo. Glove is hiding bolt holes that aren't used.
Don't need a replaceable tip, have never lost a tip, bars just wear out on the cutting edges to the point the chain bottoms out.
I'll take the 2 bars and a roll of loops, let me find out on the bigger bars.
My processor is 74 driver, and the tail is in the photo. Glove is hiding bolt holes that aren't used.
Don't need a replaceable tip, have never lost a tip, bars just wear out on the cutting edges to the point the chain bottoms out.
I'll take the 2 bars and a roll of loops, let me find out on the bigger bars.
Attachments
ChoppyChoppy
Tree Freak
The longer bars are 753HSFL114. same mount, though I think the delimber uses the extra holes. (can't remember, it's been a while since I've worked on it). They are 84 driver I believe.
Grande Dog
ArboristSite.com Sponsor
Howdy,
I don't have any 753HSFL114, or 753HSFL104 similar bars. With the Oregon numbers, the 114 has the auxiliary holes, and the 104 doesn't. When you're ready, PM me with your e-mail address and I can send you a PayPal invoice, or you can call with your info.
Regards
Gregg
I don't have any 753HSFL114, or 753HSFL104 similar bars. With the Oregon numbers, the 114 has the auxiliary holes, and the 104 doesn't. When you're ready, PM me with your e-mail address and I can send you a PayPal invoice, or you can call with your info.
Regards
Gregg
ChoppyChoppy
Tree Freak
I can call on Monday, who do I need to talk to?
Grande Dog
ArboristSite.com Sponsor
Howdy,
When you call, ask for Gregg. I've got an appointment today, and will be leaving at about 12:15 PST. I won't be back until Tuesday morning.
Regards
Gregg
When you call, ask for Gregg. I've got an appointment today, and will be leaving at about 12:15 PST. I won't be back until Tuesday morning.
Regards
Gregg
ChoppyChoppy
Tree Freak
Called wednesday and thursday, just goes to voicemail, left msgs.
Grande Dog
ArboristSite.com Sponsor
Howdy,
Sorry, I've been single jacking this week. Don't give up on me. I'll be in this weekend if you want to try and call me on my cell 707-354-3212.
Regards
Gregg
Sorry, I've been single jacking this week. Don't give up on me. I'll be in this weekend if you want to try and call me on my cell 707-354-3212.
Regards
Gregg
ChoppyChoppy
Tree Freak
Tried again yesterday (Monday), left another msg.
If you want to make a sale, call me back.
ChoppyChoppy
Tree Freak
Tried again this morning, just goes to an answering machine.
I've never had to chase a vendor like this before. Most of the outfits we deal with call or come by to see if we need anything!
I've never had to chase a vendor like this before. Most of the outfits we deal with call or come by to see if we need anything!
ChoppyChoppy
Tree Freak
I tried again this past Monday, again left a message on the 1-800 number. The cell just said "this person is not taking calls" and hangs up.
I guess if you actually want to sell the chain and bars call me, otherwise I'll just source them through Scotsco or Madsens.
Similar threads
