175# of compression
good used crank was installed with bearing and seal. Pressure and vac tested
Cylinder does have a missing fin by the exhaust flange. Appears to have a insert on the exhaust flange also for the muffler to bolt into. Holds very tight just pointing it out.
Mild porting on the cylinder
Saw runs strong.
THE BAD
Missing fin and insert as stated above
Bad bolt hole for the top cover on the starter side back see pic It hold but I don't know for how long
Insert for the Spark plug
NEEDS AIR FILTER.
400.00 plus shipping from 46158
good used crank was installed with bearing and seal. Pressure and vac tested
Cylinder does have a missing fin by the exhaust flange. Appears to have a insert on the exhaust flange also for the muffler to bolt into. Holds very tight just pointing it out.
Mild porting on the cylinder
Saw runs strong.
THE BAD
Missing fin and insert as stated above
Bad bolt hole for the top cover on the starter side back see pic It hold but I don't know for how long
Insert for the Spark plug
NEEDS AIR FILTER.
400.00 plus shipping from 46158
