Sold 28" Tsumura light bar .404 063 bar - (stihl mount 066 - 661)+ 3 chains package

[redbull660]

28" tsumura light bar - set up in .404 .063 83dl for stihl 064 066 661 mount. (S1 12mm 3003) - has some time on it but not abused. (clear coat is just discolored) I actually have 2 more bars just like this. Just letting go an extra I don't use.
+
(2) 28" Stihl RS .404 chains .063 83dl. - Bought new, not much cutting on these. Have not been sharpened. May need just a slight slight touch up with a file.
(1) 28" Archer full skip .404 chain .063 83dl - bought new not much cutting on this one either. Has not been sharpened.

$140 shipped.

 

[roger collins]

28" tsumura light bar - set up in .404 .063 83dl for stihl 064 066 661 mount. (S1 12mm 3003) - has some time on it but not abused. (clear coat is just discolored) I actually have 2 more bars just like this. Just letting go an extra I don't use.
+
(2) 28" Stihl RS .404 chains .063 83dl. - Bought new, not much cutting on these. Have not been sharpened. May need just a slight slight touch up with a file.
(1) 28" Archer full skip .404 chain .063 83dl - bought new not much cutting on this one either. Has not been sharpened.

$140 shipped.

do you have a similar setup that would fit a large mount Husky(D009)?

 

[Armbru84]

With an adapter that one will. He may have one.

 

[redbull660]

as far as I know tsumura doesn't make a 28" .063 bar for husky.

 

[Retired Marine]

The Tsumura box shows 3/8 with 91DL?

 

[redbull660]

in 3/8ths it's 91dl. since .404 is bigger then it's only 83dl for 404. Less cutters to sharpen. bigger cutters so last longer and also stay sharper longer.

 

[redbull660]

btt

 

[roger collins]

btt

do you have an adapter that will allow this to be run on a large mount husky(D009)? if so,do any mods to the bar need to be made to allow full adjustment,adequate oiling alignment,etc.?

 

[redbull660]

i might have an adaptor. will check. they run like 13 bucks. no mods needed. lot of guys use em. definitive dave sells them.

 

[roger collins]

i might have an adaptor. will check. they run like 13 bucks. no mods needed. lot of guys use em. definitive dave sells them.

would you sell this combo with the bar adapter and a new large mount husky tsumura 24 inch bar together shipped for $200?