357xp carb issue maybe?

[husky154]

Hi guys last time i was on here was 5 years ago ! Im still addicted to wood chips and blue smoke.

I did cut lots of trees last summer and the xp was running like a dream, around fall my saw kinda acted a little weirder than usual. I thought I should try setting the carb. I consider myself pretty good at it. I can usually dial it pretty close to friggin rippin.

I screwed both all the way in. then back one turn if i remember right. started the saw setted the idle screw. then screwed the H until bogging unscrewed it back until running good. I started screwing in the L to find the lean spot to then unscrew a bit but i could screw the dam thing alll the way in and the saw kept running at that point i was like whattt? something wrong. Am I right or just overthinking. I sure don't feel like damaging my trusty 07 357xp. Thanks guys appreciate any help or input.

 

[husky154]

if someone could confirm that its not normal for a saw to keep idling with the L screw fully screwed that would be great. i would try to do some diagnostic then.