Runs good, oils good, all oem in good shape. .050, 20" Tsumara bar is almost new. Will include a new C83 chain with sale. Muffler opened up on clutch side.
$300 plus shipping.
$300 plus shipping.
You can become a Supporting Member which comes with a decal or just click here to donate.
For what it's worth, if I was forced to get rid of all my saws except for one, this would be the most practical one to keep.Great deal on one of the best all around firewood saw.
And a great seller.
Welcome to AS Mr J.1979 130y mini Mac 12 in guide bar
Gas and oil reservoirs are clean and bone dry.
Does anyone know how much this little baby is worth?
If I didn't already have three 357/359's I'd probably grab this up, but I hardly run a 60 these days because I normally go from a ported 50 to a 70, which knocks the 60's out of play.For what it's worth, if I was forced to get rid of all my saws except for one, this would be the most practical one to keep.
This one has the base gasket and the timing hasn't been altered, but it wouldn't cost a guy anything to make those adjustments.If I didn't already have three 357/359's I'd probably grab this up, but I hardly run a 60 these days because I normally go from a ported 50 to a 70, which knocks the 60's out of play.
The 359 with a the muffler modded(as yours is), a base gasket delete, and a timing advance is a sweet runner. And it surely beats out a 460 rancher .
If you don't mind me removing the felling spikes and the handle, I can get it into a 12x12x16 box and I come up with $33.50 USPS.Nice looking saw, I’ve been looking for one of these. Do you have an estimate for shipping to Cedar City Utah 84720?
I will keep you posted.I'll take it if Pete doesn't.
Also, not really thinking trades, but I'm not a hard guy to deal with, and you never know what might catch my eye for a runner or a project if you throw it at me.
Sounds great. PMedIf you don't mind me removing the felling spikes and the handle, I can get it into a 12x12x16 box and I come up with $33.50 USPS.
Sorry Joe, she sailed on.I'll take it if Pete doesn't.
Another option?I'll take it if Pete doesn't.
That's a tad more expensive....Still a value.Another option?
Welcome to AS Pete.Got the saw and noodled a couple tough pieces of firewood, this thing runs! Thanks again!
Thanks, you guys have been a great help even before I joined to buy this saw. Tons of knowledge (and entertainment) shared freely.Welcome to AS Pete.
And congrats on your new saw .
Enter your email address to join: