TBS
I have chainsaws and chainsaw accessories.
As some of you know I have more than a few clone saws. My 365 clone has been having a hard time idling and seems to flood at idle no matter how far in the low speed screw is set but the high speed adjusts fine and it will four stroke nicely.
I've gone over it thuroughly, the piston and cylinder look great, the gaskets are sealing good, the intake is good, but carburetor seems to have a leak around one of the adjustment screws. I pulled both screws and noticed they both have a recessed area about halfway down the threads on the low screw and 3/4 down the threads down on the high that looks like a place for a small o-ring seal but don't see one on any ipls I've looked at.
I've gone over it thuroughly, the piston and cylinder look great, the gaskets are sealing good, the intake is good, but carburetor seems to have a leak around one of the adjustment screws. I pulled both screws and noticed they both have a recessed area about halfway down the threads on the low screw and 3/4 down the threads down on the high that looks like a place for a small o-ring seal but don't see one on any ipls I've looked at.