I have a Husqvarna 350 that I rebuilt a year ago and haven't touched it until now. It seems to have an air leak so I started poking around looking for it. It has new piston, cylinder, bearings, seals, fuel line, filter, impulse line, new style intake boot, tank vent, muffler and rebuilt carburetor. When I spray brake cleaner on the H/L needles it dies.The idle adjustment screw is right under them. The carb passed a pressure check. Tons of fuel blowing out of the muffler. Any ideas or suggestions before I replace the carburetor?
Thank. Jason.
Thank. Jason.