802climber
ArboristSite Operative
Been running a lower hours 372xp, bought a couple years ago, stock for now...
A couple quick questions.
As of the other day, the decomp valve will not pop back out after the saw starts, I have to pull it back out manually.
Does this mean it is leaking also, or just defective?
The saw starts easily and runs/idles well.
Also, I tach my saws every day after blowing out the air filter with compressed air and I have had to turn the H screw all the way counterclockwise to the limiter to get this 372 to stay below 13500. It is traveling between about 13300 and 13480. Tach is a stihl edt8.
I would rather have it a little rich than occasionally jumping a hair above 13500 at WOT like it was doing.
Something weird...This tach only works on my big saws if I clip the lead to the spark plug wire.
But it works on my small saws wirelessly......
Thanks for any advice!
A couple quick questions.
As of the other day, the decomp valve will not pop back out after the saw starts, I have to pull it back out manually.
Does this mean it is leaking also, or just defective?
The saw starts easily and runs/idles well.
Also, I tach my saws every day after blowing out the air filter with compressed air and I have had to turn the H screw all the way counterclockwise to the limiter to get this 372 to stay below 13500. It is traveling between about 13300 and 13480. Tach is a stihl edt8.
I would rather have it a little rich than occasionally jumping a hair above 13500 at WOT like it was doing.
Something weird...This tach only works on my big saws if I clip the lead to the spark plug wire.
But it works on my small saws wirelessly......
Thanks for any advice!