Want to Sell bars

[rupedoggy]

Oiler hole is real close and I think it will work. This is all I have for you at this time. Mike

 

[Sawyer man88]

I need a 28 inch 3/8 bar for stihl Ms 460 I'll swop a ms361 that's almost complete has a good p&c and bottom end

 

[rupedoggy]

Sent you a private message

 

[Cas101326]

24” 3/8 for 365?

 

[rupedoggy]

Take you pick. Top is 28 inch and bottom is 22 inch others are 24. $50 for your choice. Mike

 

[Brian Thacker]

Any McCulloch large frame bars 36" or longer. Or 24 to 30" 10 series bars. Like a Oregon 240XXX176?

Brian

 

[rupedoggy]

Take a look. Some may be Homelite but there are some Mcs there for sure. The gold one at the top is 44 inch and has a lot of miles. The next one is 38 inch and pretty good and it is marked with a Mcculloch part number.. The next few are 36 inch and the last is 32. See anything you want? Mike

 

[Brian Thacker]

How much for the yellow tip 38? And the next to the last to the right or second from the left?

Brian

 

[rupedoggy]

How about $100 for both? Mike

 

[captainmorgank]

Do you have a 24" 3/8 .050 for a Husqvarna 372xp?