More_Projects
New Member
- Joined
- Jul 29, 2014
- Messages
- 2
- Reaction score
- 0
I have a JEX Whisper Chipper that is from the 70's with a 300 6cyl. The actual year is unknown. Since the bearings are quite noisy, they needed to be replaced. Upon disassembly and removal of the bearings, I can see that the stamped numbers on the bearings are "6316 Z". There is no manufacturer stamped on the bearings. I called altec for prices and found that they were unexpectly high - $400/each. (With the need for new blades and bearings, this can be an expensive repair. I am going to buy the blade kit from altec for $300.) Would anyone happen to know the standard bearing part number and make (SKF, NSK, etc.) that asplundh sells for this chipper? I would like to avoid the Altec markup if possible.
Thanks-
Thanks-