Big spikes for 460

[zr900]

I would like to put a set of big felling spikes on my new to me 460. It came with the almost useless small inner dog only. I am wondering if anyone has a set of either the bigger Stihl ones or aftermarket ones and if they could trace them and scan the image and e-mail it to me so i can have my Dad cut some out at his shop.


Thanks

Scott

 

[stihl only]

Just a hair over $30 bucks will get you the factory ones and the super cool roller chain catcher too.

Also, if you want to spend less, there is an outboard one available to match the factory inner one but they are still going to be the shorter dogs.

Why not just make some up with really cool flame designs!

 

[blsnelling]

It's worth it just for the improved chain catcher. Noodles flow much better too.

 

[zr900]

Why not just make some up with really cool flame designs!

That is why i want to get a tracing of them with the hole pattern so i can make my own.

 

[GASoline71]

Madsen's sells a kit they make with a ceramic roller as well... they are black oxide. Look pretty cool too...

I've posted this pic before... but here is a set on Madsen's dogs my 044...

Gary

 

[gregz]

460 big spikes
1122 664 0506
1122 664 0510
catcher
1122 650 7700
dont for get the DP cover
1128 140 0801

 

[Metals406]

If you measure the distance, from center to center, between the bolts where the dogs go on your saw... You can accurately scale this picture to trace.

 

[GASoline71]

Now that I think of it... someone started a thread on here awhile back and posted a bunch of pics of "tracings" for this exact thing...

Gary

 

[Metals406]

Now that I think of it... someone started a thread on here awhile back and posted a bunch of pics of "tracings" for this exact thing...

Gary

He and all posts were deleted...

 

[GASoline71]

Oops! Oh well...

gary

 

[zr900]

I even searched before I posted this thread

 

[Metals406]

Oops! Oh well...

gary

Valiant try Gary!

 

[Metals406]

I even searched before I posted this thread

What is the distance between the centers of your mounting points? (inner and outer)

 

[zr900]

I don't have the saw here right now so i don't know.