Black Cat Performance meets the 462c

[Deleted member 135597]

Break the saws in first dikhead before you claim these gains. This is basic physics 101 numbnuts.

 

[Deleted member 135597]

Fuk this stupid useless thread! Peace Out!

 

[farmer steve]

View attachment 713285
Did you goober that weld on with a stick welder or what? That’s some crude work! Here’s what a nice one looks like!

I was thinking JB weld and not mixed properly at that.

 

[Stihl 041S]

Yah , it’s proto right now Mike , it’s just brazed in 1” stock with a press-fit sleeve that reduces the ID of the tube ... it’s called r/d for a reason ... when tests have yielded best length / diameter tube we then work on making them “look pretty for the camera”

That is Brazed?????
And if prototyping why paint?
Except to try to cover the Glop Brazing method....
Brazing should be next to invisible......

When I braze on a front sight it is very difficult to see.
And I’m just pretty good at it.

 

[Deleted member 135597]

So....... I’m bonanzass123 and was banned and don’t know why? I’m assuming this name will be banned also for admitting this but I don’t care! For what though, I would like to know? Because I’m considering hiring hotsaws101 to port a saw for me? Does the anger against hotsaws101 run this deep? Unbelievable! All the crap that gets said on this site and they ban me? Good ridence AS!

 

[NeSurfcaster]

This guy is a loud-mouth character assassinating punk who loves to run his flapper about that which he know little about ... This is a build thread not a forum for you to shoot from the hip and regurgitate the same nonsense over and over again .... nobody cares , nobody is interested, you’re not funny and you’re not cute ! Adios amigo , ignore sequence activated !

Truth hurts huh? If you only gained 10 percent that means that your mods have done nothing. All that has happened is the rings are seating in. I saw you called yourself a stihl specialist in another thread yet you said in this thread that your new to porting saws? Your a leach off other members knowledge and us tax payers

 

[Frank Rizzo]

View attachment 713300
That is Brazed?????
And if prototyping why paint?
Except to try to cover the Glop Brazing method....
Brazing should be next to invisible......

When I braze on a front sight it is very difficult to see.
And I’m just pretty good at it.

Thank you for your insight ... as stated previously the initial 1 “ tube was brazed in and cover sprayed with hi-temp black ... this is a work-in - progress and not complete as of now ... the finished product will be welded - thank you for your positive comments once again !

 

[Honyuk96]

Thank you for your insight ... as stated previously the initial 1 “ tube was brazed in and cover sprayed with hi-temp black ... this is a work-in - progress and not complete as of now ... the finished product will be JB welded, thank you for your comments once again.

Fixed it Rizzo, lets see sum kung fu now

 

[Charlie1124]

I have read all 45 pages of comments on this "build" thread.and upon completion I have came to the conclusion that the OP knows little to nothing about saw repair/modding. He!! I know more than him. And I'm not afraid to admit. I don't know much about saws. Frank. Might I offer some helpful advise. Man up. Admit you don't know as much as you claim. Admit your starved for attention since your mom cut your 40 year old ass off her tit.i guarantee you that they will let up once you admit what is well known at this point.

 

[Charlie1124]

Oh and come back at me. I'm not afraid to post pictures of my work. Nothing special. Just a super to mag conversion. Nothing for a pro like you right? Let's have a pic for pic debate. Bet I'll win! I'll start

 

[Charlie1124]

Post pic of your "462c" head. I triple dog dare you

 

[shadco]

So....... I’m bonanzass123 and was banned and don’t know why? I’m assuming this name will be banned also for admitting this but I don’t care! For what though, I would like to know? Because I’m considering hiring hotsaws101 to port a saw for me? Does the anger against hotsaws101 run this deep? Unbelievable! All the crap that gets said on this site and they ban me? Good ridence AS!

Noooo!

Not a goodbye cruel world post.

.

 

[Stihl 041S]

Thank you for your insight ... as stated previously the initial 1 “ tube was brazed in and cover sprayed with hi-temp black ... this is a work-in - progress and not complete as of now ... the finished product will be welded - thank you for your positive comments once again !

What about quality...........

 

[NeSurfcaster]

He talks the talk but sure as heII don't walk the walk. I've never seen someone seek others approval to this extant. If you've haven't figured it out yet you aint gonna. Oh yea nobody on these forums is dumb enough to believe your fake interested customer usernames. So desperate you create multiple usernames pretending to be interested customers.
sad sad sad...

 

[Mastermind Worksaws]

So today this happened.

 

[Mastermind Worksaws]

To fix it....this happened.

 

[Mastermind Worksaws]

Which gave me gas.

 

[huskihl]

So today this happened. View attachment 713356

Too much compression...


Allegedly

 

[Westboastfaller]

Should this be a concern for me? I take my health seriously, and am seriously considering getting a 362 modded. I cut about 15 cords annually for myself and family. Will I pass out running this ported saw with the possibility of a heart attack? I have family history of heart disease. Thanks

Its safer if you could just buy the wood. It's not the healthiest.

Just in the wood dust alone you are dealing with irritants, sensitizers, toxins and carcinogens which can lead to long term damage and death such as allergies, chronic bronchitis, asthma. and mouth/ throat cancer:
Nasopharyngeal carciomo (NPC)

Red Cedar has plicatic acid that will create Asthma. It will cause an accelerated decline in lung function.
As well NPC concerns.

When I started my first intense first aid training in '91; The industrial lung disease was Mesothelioma from asbestos. More recent yrs Silicosis from Silica dust was added. Now we have NPC from wood dust.

They had mentioned there has been a high rate of Testicular cancer with mechanics too. They say its from stuffing contaminated rags in their pockets. I know I've burnt my ball off more than a few times with caps coming off or not putting then on.

Then you suck exhaust in for yrs on end when you have the wrong temps and atmosphere pressure (snows on the trees) Sometimes it is not very pleasant.

The list of industrial diseases you likely will get from running a saw for 30,000 hours is endless.

Hand arm vibration syndrome (HAVS)
white finger Syndrome (WFS)
carpal tunnel syndrome
Arthritis
Muscular skeletal injuries (MSI's)

Falling timber on a hill and many end up with a double hernia.

The list goes on.

If the plane of helicopter doesn't fall out of the sky Or the truck doesn't leave the road driving on dark ice roads for a few hours a day or you don't hit a moose or the mountain doesn't slide..then providing you don't get a real bad deal or just make a fatal mistake falling or bucking then you have all that mentioned above that goes with the territory.

You give your life to it and it will take a life.. one way or another.

 

[jakethesnake]

What kind of two stroke oil you use frank?