JONSSTIHL
ArboristSite Operative
I'm have the carb off my 025 found out it is a walbro wt-215 with a k1 stamped in it
I was wondering about a little how to help on a carb rebuild. I rebuilt the tillotson on my little jonsered from the 70's but I didn't bother changing out the welch plugs since the inlet screen was clean
but on this carb, the fuel line is cracked and the fuel filter is XXX number of years old so I think I will opt for a complete rebuild without cutting any corners
what is a good way of getting welch plugs out, drill and pry or will they pop out with a little prying. and are there any specs for putting them back in
thanks for any tips
I was wondering about a little how to help on a carb rebuild. I rebuilt the tillotson on my little jonsered from the 70's but I didn't bother changing out the welch plugs since the inlet screen was clean
but on this carb, the fuel line is cracked and the fuel filter is XXX number of years old so I think I will opt for a complete rebuild without cutting any corners
what is a good way of getting welch plugs out, drill and pry or will they pop out with a little prying. and are there any specs for putting them back in
thanks for any tips