Eager beaver 3.7 clutch removal?

[rooster68]

I have removed the nut on the outside of the shaft.does the clutch turn off?what direction? or is the shaft splined?thanks in advance

 

[Warped5]

I have removed the nut on the outside of the shaft.does the clutch turn off?what direction? or is the shaft splined?thanks in advance

Just a pressure fit. Use a small puller or pry up gently while tapping on the end of the crankshaft. It'll pop right off.

Make sure you reassemble in the correct order ....

 

[rooster68]

thanx..put nut on flush wit end of crankshaft,couple light taps,came right off!thanx again..